MXRuler Accessory

MaxxMacro 23926 Stepped 60mm Support Tab MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Support tab adjusted by -5 mm. For MXruler.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro MXRuler 23926 WEDM Stepped 60mm Support Tab (Set of 2) for positioning workpieces 5 mm above machine zero line. This tab enables precise, accurate, and reliable positioning of workpieces, drastically reducing the time required for quality assurance in production processes. The MaxxMacro MX-23926 MXRuler WEDM Zero-line support tab is fully compatible with System 3R ruler system. Recommended maximum workpiece weight per tap 50 kg.

MaxxMacro 2015A Angle shelf MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Mounts directly on the machine table. For vertical mounting of a MaxxMacro chuck in the machine.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 2015A WEDM Angle shelf mounts directly on the machine table. For vertical mounting of a Macro chuck in the machine. Its design ensures maximum stability for precise and reliable accuracy. Enjoying the ease of installation without the need for further attachments. MaxxMacro 2015A WEDM Angle shelf is fully compatible with System 3R macro system. *Chuck not included

MaxxMacro 2015 Angle shelf MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Mounts directly on the machine table. For vertical mounting of a MaxxMacro chuck or short reference element in the machine.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 2015 MXRuler WEDM Angle shelf mounts directly on the machine table. For vertical mounting of a Macro chuck or short reference element in the machine. Its design ensures maximum stability for precise and reliable accuracy. Enjoying the ease of installation without the need for further attachments.

MaxxMacro 239251 Standard Support Tab MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Support tab for MXruler.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro MXRuler 239251 WEDM Standard Support Tab (Set of 2) for positioning workpieces on machine zero line +5mm. This tab enables precise, accurate, and reliable positioning of workpieces, drastically reducing the time required for quality assurance in production processes. Recommended maximum workpiece weight per tap 50 kg.

MaxxMacro 239241 Basic Toe Clamps MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Basic clamps for MXRuler, designed for use with tabs.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 239241 MXRuler Basic WEDM Clamps work to secure workpieces onto the MXRuler with MaxxMacro's Zero-line support tab. MaxxMacro 239241 MXRuler Basic WEDM Clamps is 100% cross compatible with System 3R ruler These clamps are precision engineered and tested for accurate tool positioning, enabling repeatable and reliable machining results. M6 thread.

MaxxMacro 23925 Standard 60mm Support Tab MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Support tab for MXruler.

MaxxDesign Exclusive Features:

• Works with any MXRuler.
• Positions the workpiece 5 mm above the zero line without interfering with the lower head’s space.

MaxxMacro A239 Clamps non-rail MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Clamps of aluminium for mounting a ruler directly on the machine table without reference elements.

MaxxDesign Exclusive Features:

• Works with any MXRuler.
• Allows easy and flexible direct mounting on any machine table.

MaxxMacro 225 Reference Stop MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Can be moved infinitely along the entire reference element.

MaxxDesign Exclusive Features:

• Works with any MaxxMacro Reference Element.
• Can be moved infinitely along the entire reference element.

MaxxMacro 23922 Stepped Support Tab MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Support tab adjusted by -5 mm. For MXruler.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro MX-23922 MXRuler WEDM Zero-line support tab for positioning workpieces 5 mm above machine zero line. This tab enables precise, accurate, and reliable positioning of workpieces, drastically reducing the time required for quality assurance in production processes. Recommended maximum workpiece weight per tap 50 kg.

MaxxMacro A2392 86mm Clamps MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Clamps for clamping rulers on reference elements.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro A2392 MXRuler WEDM Clamps facilitate the secure attachment of 86mm MXrulers to reference elements.

MaxxMacro 2392 Low Profile Holder MXRuler Accessory WEDM (Set of 4) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For clamping thin workpieces.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro MXRuler 2392 WEDM Low Profile Holder for clamping thin workpieces. To be mounted on MXRuler. MaxxMacro MXRuler 2392 WEDM Low Profile Holder is fully compatible with System 3R ruler system. Supplied in sets of 4

MaxxMacro 2391 Ruler Vise MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Movable jaws of SuperVice design provide a wide clamping range for rectangular workpieces. Detachable Z-support tabs ensure simple setting-up.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 2391 Ruler Vise MXRuler Accessory WEDM features movable jaws for an extensive range of rectangular items and detachable Z-support tabs to ensure simple setting-up. To be mounted on MXruler. Recommended maximum workpiece weight with one vise: 15 kg. Recommended maximum workpiece weight with two vises: 200 kg.

MaxxMacro 23920 MXRuler Ruler WEDM User Kit comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Kit for clamping rectangular, round or thin workpieces.

MaxxDesign Exclusive Features:

• High quality materials: Full 440C rust proof design.
• Allows clamping of different workpiece shapes and sizes.

Product Information:

MaxxMacro 23920 MXRuler WEDM Ruler Kit is fully compatible with the System 3R ruler system. The MaxxMacro 23920 MXRuler Kit offers greater flexibility and efficiency, making it easy to integrate into workflows that switch between different systems. Designed to work seamlessly with any MXRuler (60mm or 86mm) or compatible adapter, this kit opens up a wide range of clamping options for various workpieces. MaxxMacro 23920 MXRuler WEDM Ruler Kit includes: MaxxMacro MXRuler 2391 WEDM Ruler Vise (MM-RUACR209 / MX-2391) along with a set of tabs MM-RUACR204; MaxxMacro MXRuler 2392 WEDM Low Profile Holder (MM-RUACR208 / MX-2392); MaxxMacro MXRuler 2393 WEDM Vee holder (MM-RUACR206 / MX-2393); Torque wrench, 8 Nm; Allen key, 3 mm; Allen key, 4 mm.

MaxxMacro A2391 60mm Clamps MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Clamps for clamping rulers on reference elements.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro A2391 MXRuler WEDM Clamps facilitate the secure attachment of 60mm MXrulers to reference elements.

MaxxMacro 2393 Vee holder MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For clamping round workpieces. To be mounted on MXruler or adapters.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro MXRuler 2393 WEDM Vee holder for clamping round workpieces. To be mounted on MXruler. Clamping range Ø25-300 mm, for workpieces larger than Ø130mm the product has to be used with a second MXRuler instead of the beam supplied. Height with toe clamps: 13.5-30 mm. 3 sets of screw (M6x60; M6x80 and M6x128)