Makino SP43

MaxxMacro 239345 MXRuler Ruler 345mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Mitsubishi MX600
• Mitsubishi MX900
• Mitsubishi PA10
• Mitsubishi QA10
• Sodick AQ300
• Fanuc Alpha 0B
  

Vertical setup:

• Mitsubishi MX900
• Mitsubishi MP1200
• Mitsubishi MV1200R
• Mitsubishi MD Pro 3
  
• Makino DUO43
• Makino EU43
• Makino SP43
  

MaxxMacro 20044J1 MXRuler WEDM Reference Element 445mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Accutex AU 600
• AgieCharmilles CUT 300 (yr 2012-)
  
• AgieCharmilles CUT 300 mS / Sp
  
• AgieCharmilles CUT P 550
  
• Charmilles RoboFil 380
  
• Charmilles RoboFil 390
  
• Charmilles RoboFil 430
  
• Charmilles RoboFil 440
  
• Makino U3 H.E.A.T. (Square)
  
• Makino U3 (U-shape)
  
• Makino U3i (Square)
  
• Makino U32j
  
• Makino UP32j
  
• Makino UPV-3
  
• Makino W32FB
  
• Makino U32
  
• Makino U32i
  
• Makino WB32B
  
• ONA AF25
  
• ONA AV35
  
• ONA AD35

Vertical setup:

• Charmilles RoboFiI 380
  
• Charmilles RoboFil 390
  
• Makino SP43 (US, yr 2005-)
  
• ONA AF25
  
• Seibu 1175B
  
• Seibu MM35B
  
• Seibu MM75B
  
• Seibu MM80B
  

MaxxMacro 239515 MXRuler Ruler 515mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Makino EU43
• Makino SP43
  
• Makino U32j (Square)
  

MaxxMacro 2004J1 MXRuler WEDM Reference Element 395mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT P 1250
  
• Excetek V1060
  
• Makino EU43
  
• Makino SP43
  
• Sodick AL600G
  
• Sodick ALC600G
  
• Sodick ALN600G
  
• Sodick ALN600Q
  
• Sodick VL600Q
  
• Sodick AG600L
  
• Sodick AQ537L
  
• Sodick AQ560L
  
• Sodick SL600G
  
• Sodick SL600P
  
• Sodick SL600Q
  
• Sodick SLC600G
  
• Sodick AQ750L
  
• Sodick AQ550
  
• Seibu M35B
  

Vertical setup:

• Charmilles RoboFil 640
  
• Charmilles RoboFil 690
  
• Charmilles RoboFil 690cc
  
• Makino U1310
  
• Makino EU43
  
• Makino SP43
  
• Mitsubishi MV1200S
  
• Sodick AD325L
  
• Sodick AL800G
  
• Sodick AL800P
  
• Sodick ALC800G
  
• Sodick ALN800G
  
• Sodick AQ900L
  
• Sodick AQ300
  
• Sodick AQ327L
  
• Sodick AQ400L
  

MaxxMacro 239365 MXRuler Ruler 365mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc alpha 0iA
• Fanuc alpha 0iB
• Fanuc alpha 0iC
• Fanuc Alpha 0C
  
• Fanuc alpha 0iP
  
• Mitsubishi BA8
• Mitsubishi MD Pro 2
• Mitsubishi PA05
  
• Sodick AD325L
  

Vertical setup:

• ONA AE300
• ONA AX3
  
• Makino SP43