EDM

MaxxMacro 70 Stainless Mounting Plate for Low Profile Manual Chuck comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials: Full stainless steel design.
• Chuck not included

Product Information:

For chuck: MM-MK70R000 (MX-6004-70RS) MaxxMacro 70 Low Profile Manual Chuck Rust Proof WEDM

MaxxMacro 70 Twin Manual Angle Adapter 90 Degree Adapter Rust Proof WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For horizontal mounting of MaxxMacro holders. Rust resistant.

MaxxDesign Exclusive Features:

• Includes two MaxxMacro Manual Chucks, full rust-proof construction for Wire EDM environments.
• Positional accuracy to data. 004mm

Product Information:

MaxxMacro 70 Twin Manual Angle Adapter 90 Degree Adapter allows user to quickly go from vertical to horizontal position while maintaining location and accuracy. Rounded corners allowing closer access to burn locations without the worry of corners tagging.

MaxxMacro 70 WEDM Horizontal Pneumatic Chuck RSM 600143 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Horizontal pneumatic chuck for permanent mounting on the machine table.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

MaxxMacro 54 Stainless Pocket Electrode Holder S25 Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 54 Stainless Pocket Electrode Holder S25 Automated Changing is 100% cross compatible with System 3R 3R-658.4E-S Square Pocket Electrode Holder. Works on all System 3R Macro Systems. Repeatability .002MM

• Repeatability .002MM
• Assembled in our MaxxMacro Pallet 54 Performance Rust Proof Pallet
• Includes 2 Stainless Set Screws
• Includes proper chip pocket position for automated robotic loading

Product Details:

MaxxMacro 54 to Maxx-ER Rapid-action Pneumatic Chuck 007625 System Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic adapter for easy transition from MaxxMacro to Maxx-ER.

MaxxDesign Exclusive Features:

• Includes Pneumatic Rapid Action Chuck
• 100% cross-compatible with System 3R and Erowa ITS systems

Product Information:

MaxxMacro 54 to Maxx-ER Rapid-action Pneumatic Chuck 007625 Adapter is 100% cross compatible with Erowa Rapid Action Pnuematic EDM Chuck ER-007625 and with System 3R Macro system.

MaxxMacro 54 Stainless Slotted Electrode Holder U25 Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for flat electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro Pallet 54 Performance Rust Proof Pallet
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Stainless Slotted Electrode Holder is fully compatible with System 3R Macro OEM holders. It comes fully assembled and ready to run, with four set screws to secure the electrode. It is mounted on our precision-cast plated stainless MaxxMacro Pallet 54 Performance Rust Proof Pallet—ready to run right out of the box. Ideal for holding saw-cut or milled blanks with reliability and repeatability.

MaxxMacro 70 Heavy Duty Precision Magnetic Pallet Chuck with Performance Pallet comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Magnetic pallet chuck for the MaxxMacro system.

MaxxDesign Exclusive Features:

• Magnetic pallet actuated by Allen wrench
• Comes complete with MaxxMacro 70 Performance Pallet

Product Information:

MaxxMacro 70 Heavy Duty Precision Magnetic Pallet Chuck with Performance Pallet is constructed from hardened 420C stainless steel (48–52 HRC) and provides a rugged, high-precision solution for clamping. The unit measures 170 × 95 × 60 mm (6.7" × 3.74") and is Allen wrench actuated. Lifting handles are included for easy handling.Clamping force: 100 N/cm². If you intend to use it in Wire EDM, please understand that while it withstands oil exposure, prolonged water contact in WEDM may cause rust. Users are advised to avoid water conditions when possible. Regular grinding maintenance is recommended to address wear during usage and optimize performance.

MaxxMacro 70 Twin Pneumatic Low Profile Chuck 30210 Rust Proof comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck for MaxxMacro or MaxxMacroTwin. Horizontal mounting on the machine table.

MaxxDesign Exclusive Features:

• Twin Pneumatic Chuck with High Clamping Force
• Air-blast cleaning for Z-reference surfaces

Product Information:

Experience effortless, precise machining with the MaxxMacro 70 Twin Pneumatic Low Profile Chuck 30210 Rust Proof. Fully 100% cross-compatible with System 3R models 3R-602.10-1, 3R-602.12-1, and 3R-602.12-1K, this chuck features horizontal mounting to reduce setup time and costs. Its quick-change design enables fast, safe, and high-precision operations, ideal for demanding applications. The chuck includes air-blast cleaning for Z-reference surfaces to ensure accurate positioning and offers a powerful clamping force of 2 × 6700 N for secure workholding.

MaxxMacro 54 Stainless Round Stock Holder 1.25" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for round electrodes.

MaxxDesign Exclusive Features:

• Fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Round Stock Stainless Electrode Holder features a pocket with a tight tolerance of -0 / +0.001" and a depth of 0.625". The workpiece is securely held by a stainless steel set screw. Fully compatible with System 3R Macro tooling, this precision-machined holder delivers repeatability within 0.002 mm. It comes fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet, ready for immediate use.

MaxxMacro 54 Manual Chuck with Flange 60023 Rust Proof comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Cast chuck with mounting flange for mounting on the machine spindle or in a fixture.

MaxxDesign Exclusive Features:

• Includes flange
• Rust-resistant stainless steel body.

Product Information:

MaxxMacro 54 Manual Chuck with Flange 60023 Rust Proof is a rust-resistant, cast stainless steel chuck built for permanent mounting on a machine spindle. Its precision-ground back face ensures accurate installation, while the integrated mounting flange supports standard Macro holders. Designed for manual operation, it features four fixed index positions (4×90°).

MaxxMacro 54 Stainless Mounting Plate for Manual QuickChuck comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 54 Chuck Mounting Plate is specifically designed to mount a MaxxMacro 54 quick chuck onto the machine table. It offers a precise fit for lasting durability and stability, ensuring the chuck is held securely in place with minimal vibration. For MaxxMacro Chuck 54 Quick Chuck. *Chuck not included

MaxxMacro 54 Multi 5 QuickChuck Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-chuck system on a common mounting plate for compact setups.
• Supports multiple operations to increase productivity.

MaxxMacro 54 Stainless Slotted Electrode Holder 1.0" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 54 Stainless Slotted Electrode Holder 1.0" (-0 + .001) is 100% cross compatible with System 3R 3R-658.2E-S Slotted Electrode Holder. Works on all System 3R Macro Systems.

Repeatability .002MM

MaxxMacro 54 Stainless Slotted Electrode Holders are assembled with Stainless screws and our MaxxMacro 54 Stainless Cast Pallet Plated

Includes 4 Stainless Set Screws

Includes proper chip pocket position for automated robotic loading

Product Details:

MaxxMacro 54 Variable Angled ER Collet Chuck ER16 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To handle a wide range of tooling and workpiece types, angles can be set continuously from 0° to 90°.

MaxxDesign Exclusive Features:

• Chuck includes our MaxxMacro 54 440C performance pallet.
• Compatible with standard ER collet sizes

Product Information:

The MaxxMacro 54 Variable Angled Collet Chuck ER16 is fully cross compatible with System 3R Macro Systems and designed for superior stability and durability. Featuring an optimized angular collet locking shape, it ensures enhanced grip and longer service life while accommodating a wide range of tooling and workpieces. The chuck’s angle can be continuously adjusted from 0° to 90°, making it ideal for machining complex components and accessing hard-to-reach areas such as drops and gates with pinpoint accuracy.

MaxxMacro 54 Stainless V-Block Holder Vise 8458 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Clamping from outside, precision machined electrodes or small workpieces.

MaxxDesign Exclusive Features:

• Constructed of 440C Stainless for max hardness and rust resistance.
• Prism ground bearing surfaces 10 mm +/– 0.005 mm from the center.

Product Information:

MaxxMacro 54 Stainless V-Block Holder Vise 8458 offers perfect interchangeability, delivering exceptional accuracy and precision for your machining operations. Designed for external clamping of precision-machined electrodes or small workpieces, this vise ensures secure and consistent holds, enabling highly accurate machining—even on the smallest components. The prism-ground bearing surfaces are precisely located 10 mm ± 0.005 mm from center, ensuring accurate centering for critical measurements and repeatable performance.

MaxxMacro 54 Stainless Round Stock Holder .125" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for round electrodes.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Round Stock Stainless Electrode Holder features a pocket with a tight tolerance of +0 / -0.001" and a depth of 0.625". The workpiece is securely held by a stainless steel set screw. Fully compatible with System 3R Macro tooling, this precision-machined holder delivers repeatability within 0.002 mm. It comes fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet, ready for immediate use.

MaxxMacro 70 Pneumatic Low Profile Chuck Rust Proof WEDM Disable Index comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck for permanent mounting on the machine table with index-disable feature.

MaxxDesign Exclusive Features:

• Disable Index system.
• Full 440C stainless steel construction and rust-proof mechanism.

Product Information:

MaxxMacro Chuck 60281 is a low-profile pneumatic chuck engineered for permanent installation on machine tables in both Wire EDM and CNC machining environments. This chuck features a Disable Index system with a male-female interface that helps prevent contamination from chips and debris. An evacuation hole is located between the two pneumatic ports—always ensure the SSFP (sealing screw flat point) is securely installed to maintain proper sealing and prevent air pressure loss during operation.

MaxxMacro 54 Manual Angle Adapter 90 Degree Rust Proof WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Rust-resistant 90-degree manual chuck, designed for mounting on a 54 WEDM chuck and positioned just above the zero line.

MaxxDesign Exclusive Features:

• Includes a MaxxMacro 54 Performance Pallet
• Allows for mounting Macro fixtures just above the zero line of Wire EDM machines.

Product Information:

MaxxMacro 54 Manual Angle Adapter 90 Degree Rust Proof WEDM is specifically designed for mounting MaxxMacro holders at a 90º angle in the MaxxMacro system, just above the zero line of Wire EDM machines. This setup helps avoid collisions while maximizing available space.

MaxxMacro 70 Aluminum Low Profile Manual Chuck Extension 12" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Vertical extension with manual chuck.

MaxxDesign Exclusive Features:

• Precision ground to ensure uniform height. This guarantees that when using multiple extensions, they all have the same height.
• Height accuracy is 0.008 mm (0.0003"), and XY accuracy is 0.002 mm.

MaxxMacro 54 Brass Blank Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To mount electrodes and workpieces of various shapes.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Includes Chip Carrier (Chip Sensor) and threaded holes for Cleat.

Product Information:

The MaxxMacro 54 Blank Electrode Holder comes completely assembled with our MaxxMacro 54 Plated Pallet and is ready to machine your own custom pattern into. We provide both top and bottom (Pallet) precision ground.

MaxxMacro 54 Stainless Flat Electrode Holder 81x51 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To mount electrodes and workpieces of various shapes.

MaxxDesign Exclusive Features:

• Configured for larger electrodes
• Includes a MaxxMacro 54 Casted and Plated Pallet

Product Information:

MaxxMacro 54 Stainless Flat Electrode Holder 81x51 is designed to securely mount electrodes and workpieces with a base surface larger than 80 mm. All MaxxMacro holders are post-assembly ground to deliver industry-leading flatness tolerances. Please note: the 9 mm holes are clearance holes intended for bolts, not precision locating. The distance tolerance to center is approximately ±0.2 mm. Dowels are not included, though some users choose to install their own for additional locating accuracy.

MaxxMacro 54 Stainless Round Stock Holder 25mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for round electrodes.

MaxxDesign Exclusive Features:

• Fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Round Stock Stainless Electrode Holder features a pocket with a tight tolerance of -0 / +0.025mm and a depth of 0.0254mm. The workpiece is securely held by a stainless steel set screw. Fully compatible with System 3R Macro tooling, this precision-machined holder delivers repeatability within 0.002 mm. It comes fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet, ready for immediate use.

MaxxMagnum Self Centering MaxxVise 2.75" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

• MaxxVise's MaxxMagnum HP Self Centering Vise 2.75 Inch Size Work Piece is designed for high accuracy precision CNC equipment horizontal and vertical.
• Stainless Steel Construction 2.75" Maximum work piece
• Bidirectional self centering repeatability .005MM
• Mounted and Centered on MaxxMagnum 156 Pallet Ready to Run This pallet functions on all MaxxMagnum and System 3R Magnum chucks
• Max torque: 8Nm

Product Details:

MaxxMacro 54 Stainless Round Stock Holder 15mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for round electrodes.

MaxxDesign Exclusive Features:

• Fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Round Stock Stainless Electrode Holder features a pocket with a tight tolerance of -0 / +0.025mm and a depth of 0.0254mm. The workpiece is securely held by a stainless steel set screw. Fully compatible with System 3R Macro tooling, this precision-machined holder delivers repeatability within 0.002 mm. It comes fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet, ready for immediate use.

MaxxMacro 54 Brass Pocket Electrode Holder S35 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for square or round electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Cast Plated Pallet
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Brass Pocket Electrode Holder is fully compatible with System 3R Macro OEM holders. It comes fully assembled and ready to run, with two set screws to secure the electrode. It is mounted on our precision-cast plated stainless MaxxMacro 54 Pallet—ready to run right out of the box. Ideal for holding saw-cut or milled blanks with reliability and repeatability.

MaxxMacro 54 Brass Slotted Electrode Holder U35 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for flat electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Cast Plated Pallet
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Brass Slotted Electrode Holder is fully compatible with System 3R Macro OEM holders. It comes fully assembled and ready to run, with four set screws to secure the electrode. It is mounted on our precision-cast plated stainless MaxxMacro 54 Pallet—ready to run right out of the box. Ideal for holding saw-cut or milled blanks with reliability and repeatability.

MaxxMacro 54 Stainless Pocket Electrode Holder S20 Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for square or round electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro Pallet 54 Performance Rust Proof Pallet
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Stainless Pocket Electrode Holder is fully compatible with System 3R square pocket holders and works seamlessly across all System 3R Macro Systems. Engineered for precision with a repeatability of 0.002 mm, this holder comes fully assembled and ready for immediate use. It includes stainless set screws and is mounted on our plated MaxxMacro Pallet 54 Performance Rust Proof Pallet for exceptional durability and stability.

MaxxMacro 54 Stainless Slotted Electrode Holder U20 Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for flat electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro Pallet 54 Performance Rust Proof Pallet
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Stainless Slotted Electrode Holder is fully compatible with System 3R Macro OEM holders. It comes fully assembled and ready to run, with four set screws to secure the electrode. It is mounted on our precision-cast plated stainless MaxxMacro Pallet 54 Performance Rust Proof Pallet—ready to run right out of the box. Ideal for holding saw-cut or milled blanks with reliability and repeatability.

MaxxMacro 54 Stainless Round Stock Holder 10mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for round electrodes.

MaxxDesign Exclusive Features:

• Fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Round Stock Stainless Electrode Holder features a pocket with a tight tolerance of -0 / +0.025mm and a depth of 0.0254mm. The workpiece is securely held by a stainless steel set screw. Fully compatible with System 3R Macro tooling, this precision-machined holder delivers repeatability within 0.002 mm. It comes fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet, ready for immediate use.

MaxxMacro 54 Stainless Round Stock Holder 20mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for round electrodes.

MaxxDesign Exclusive Features:

• Fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Round Stock Stainless Electrode Holder features a pocket with a tight tolerance of -0 / +0.025mm and a depth of 0.0254mm. The workpiece is securely held by a stainless steel set screw. Fully compatible with System 3R Macro tooling, this precision-machined holder delivers repeatability within 0.002 mm. It comes fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet, ready for immediate use.

MaxxMacro 54 Stainless Round Stock Holder 6mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for round electrodes.

MaxxDesign Exclusive Features:

• Fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Round Stock Stainless Electrode Holder features a pocket with a tight tolerance of -0 / +0.025mm and a depth of 0.0254mm. The workpiece is securely held by a stainless steel set screw. Fully compatible with System 3R Macro tooling, this precision-machined holder delivers repeatability within 0.002 mm. It comes fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet, ready for immediate use.

MaxxMacro 70 Low Profile Manual Chuck 60028 with Mounting Plate comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Cast chuck with mounting plate for mounting on the machine table.

MaxxDesign Exclusive Features:

• Includes universal adapter plate with 150mm mounting holes.
• Low profile design.

MaxxMacro 70 Low Profile Manual Chuck 60028 Corrosion Resistant comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Cast chuck with a ground back face for mounting on the machine spindle. Also suitable for use in a fixture on the machine table or with an adapter plate.

MaxxDesign Exclusive Features:

• Low profile design.
• Corrosion Resistant Chuck.

MaxxMacro 70 Stainless Mounting Plate for Low Profile Chuck comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 54 Chuck 26488A Adapter Plate for mounting of MaxxMacro chuck to a common mounting plate. MaxxMacro or System 3R chucks with a 84 MM mounting circle are compatible with this adapter plate. System 3R Cross compatible with 3R-A26488 Compatible chucks (Not Limited To) MX-60028 MX-600143 MX-60281

MaxxMacro 54 Stainless V-Block Holder Vise Rust Proof WEDM Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For clamping parts in prismatic slots. Various clamping shackles available as spare parts.

MaxxDesign Exclusive Features:

• Included Maxx Clamping Shackle 40mm
• Parallel and angular precision 0.01 mm.

Product Information:

MaxxMacro 54 Stainless V-Block Holder Vise Rust Proof WEDM Performance is specifically designed to clamp parts in prismatic slot. Clamp screw size: M8 x 1.25. Included Maxx Clamping Shackle 40mm

MaxxMacro 54 Manual Angle Adapter 90 Degree Adapter Rust Proof WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For horizontal mounting of MaxxMacro holders. Rust resistant.

MaxxDesign Exclusive Features:

• Full rust-proof construction for Wire EDM environments.
• Positional accuracy to data. 004mm

Product Information:

MaxxMacro 54 Manual Chuck 90 Degree Adapter Rust Proof WEDM allows user to quickly go from vertical to horizontal position while maintaining location and accuracy. Rounded corners allowing closer access to burn locations without the worry of corners tagging.

MaxxMacro 70 Pneumatic Chuck 6001030 with Mounting Plate WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Rust proof pneumatic chuck for permanent mounting on the machine table.

MaxxDesign Exclusive Features:

• Mounting Plate with adjustable jack screws for easy alignment and setup.
• Z-Pads Air Clean function.

Product Information:

The MaxxMacro 70 Pneumatic Chuck 6001030 with Mounting Plate WEDM is designed for high-precision automation and WEDM applications. Fully compatible with System 3R Macro systems, it features an Air Clean function for optimal performance and can be operated using either an air gun or automated switch. This chuck includes a rust-resistant 440C stainless steel 102mm x 102mm base plate and corrosion-resistant internal mechanisms for long-term reliability in demanding environments.

MaxxMacro Manual Drawbar 60527 Stainless Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Drawbar compatible with any MaxxMacro pallet. Check the required type for the chuck you are using.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro Performance Manual 60527 Drawbar Stainless is 100% cross compatible with System 3R Drawbar 3R-605.27 Macro Drawbar. MaxxMacro Performance Manual 60527 Drawbar Stainless includes the plastic clip and are machined ABCD all locations for precision seating of pallet. 100% cross compatible with System 3R Macro Tooling Systems 3R-605.27, 3R-605.27E, 3R-605.27RS, 3R-605.27EE.

MaxxMacro 70 Stainless 17,5mm Spacer Pallet comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For graphite electrodes or copper electrodes/workpieces with a rough mounting surface. To be mounted on MaxxMacro pallet.

MaxxDesign Exclusive Features:

• Ground Top and Bottom
• Includes proper chip pocket for automated robotic loading

Product Information:

MaxxMacro 70 Stainless 17,5mm Spacer Pallet is predrilled for mounting on MaxxMacro 70 pallets.

MaxxMacro 54 Aluminum Manual Chuck Horizontal Extension 6.5" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Horizontal extension with manual chuck.

MaxxDesign Exclusive Features:

• High quality materials: Chuck and Pallet are 440C 57-60HRC rust proof design.
• Extension: Aluminum 6.5" Center to Center

Product Information:

Note due to the limitations of aluminum it is recommended the user master the extension and adjust provided data once the MaxxMacro Horizontal Chuck Extension is installed on your equipment.

MaxxMacro 75 Stainless Performance Rust Proof Pallet with .250" Dowels comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Machined from solid Stainless 440c block, performance pallet.

MaxxDesign Exclusive Features:

• Machined from solid 440C stainless steel for maximum strength and corrosion resistance
• Includes four finished .250" dowel holes

MaxxMacro 54 Aluminum Manual Chuck Horizontal Extension 10" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Horizontal extension with manual chuck.

MaxxDesign Exclusive Features:

• High quality materials: Chuck and Pallet are 440C 57-60HRC rust proof design.
• Extension: Aluminum 10" Center to Center

Product Information:

Note due to the limitations of aluminum it is recommended the user master the extension and adjust provided data once the MaxxMacro Horizontal Chuck Extension is installed on your equipment.

MaxxMacro 54 Stainless Performance Pallet MXRefix comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Hardened, with MXrefix holes, flushing connection and clearance holes for two fixing screws.

MaxxDesign Exclusive Features:

• Machined from solid 440C stainless steel for maximum strength and corrosion resistance
• Includes MXrefix and dowels holes

MaxxMacro 70 Manual QuickChuck Low Profile Chuck 60227 Rust Proof WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Manual low-profile quickchuck for Macro

MaxxDesign Exclusive Features:

• Application: WEDM, Milling, Grinding, Layout table , CMM
• Rust-Resistant Construction

Product Information:

The MaxxMacro 70 Manual Low Profile Chuck 60227 Rust Proof WEDM is fully 100% cross-compatible with System 3R 3R-602.27. Designed for versatile use in WEDM, milling, grinding, layout tables, and CMM applications, it ensures precise and stable workholding. The chuck requires the MaxxMacro Performance Manual 60527 Drawbar and delivers a static repeatability accuracy of ±0.002 mm. Its rust-resistant construction guarantees durability in demanding environments.

MaxxMacro 70 Stainless 30mm Spacer Pallet Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For graphite electrodes or copper electrodes/workpieces with a rough mounting surface. Performance pallet.

MaxxDesign Exclusive Features:

• Clearance holes for four fixing screws
• Includes a MaxxMacro 70 Performance Pallet

Product Information:

MaxxMacro 70 Stainless 30mm Spacer Pallet Performance is specifically designed for graphite or copper electrodes, as well as workpieces with rough or uneven mounting surfaces. Its hardened stainless steel construction ensures long-lasting durability and consistent performance in demanding applications. This product includes a MaxxMacro 70 Performance Pallet.

MaxxMacro 54 Stainless Performance Pallet 70mm Riser With Gripper Slots comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Performance pallet with gripper slots, 4 clearance holes, and 1 center hole.

MaxxDesign Exclusive Features:

• Includes a MaxxMacro 54 Performance Pallet
• Integrated gripper slots for robotic handling

Product Information:

MaxxMacro 54 Stainless Performance Pallet 70mm Riser With Gripper Slots features four clearance holes and one center hole, along with integrated gripper slots for robotic handling. This setup includes a MaxxMacro 54 Performance Pallet, offering reliable precision and durability for demanding applications.

MaxxMacro 54 Self Centering MaxxVise 2.75" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxVise Self Centering Vise 2.75 Inch Max MaxxMacro 54 HP is designed for high accuracy precision CNC equipment horizontal and vertical.

• Stainless Steel Construction 2.75" Maximum work piece
• Bidirectional self centering repeatability .005MM
• Mounted and Centered on MaxxMacro 54 HP Premium Pallet, 100% cross compatible with System 3r Macro Systems.
• If you are robotically loading we can adapt this vise to various grippers, stop buttons etc.
• Max Torque: 8Nm

Product Details:

MaxxMacro 54 Stainless 30mm Spacer Pallet Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For graphite electrodes or copper electrodes/workpieces with a rough mounting surface. Performance pallet.

MaxxDesign Exclusive Features:

• Clearance holes for four fixing screws
• Includes a MaxxMacro 54 Performance Pallet

Product Information:

MaxxMacro 54 Stainless 30mm Spacer Pallet Performance is specifically designed for graphite or copper electrodes, as well as workpieces with rough or uneven mounting surfaces. Its hardened stainless steel construction ensures long-lasting durability and consistent performance in demanding applications. This product includes a MaxxMacro 54 Performance Pallet.

MaxxMacro 70 Aluminum Low Profile Manual Chuck Extension 6" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Vertical extension with manual chuck.

MaxxDesign Exclusive Features:

• Precision ground to ensure uniform height. This guarantees that when using multiple extensions, they all have the same height.
• Height accuracy is 0.008 mm (0.0003"), and XY accuracy is 0.002 mm.

MaxxMacro 70 Pneumatic Low Profile Chuck 30210 Rust Proof comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck for MaxxMacro holders.

MaxxDesign Exclusive Features:

• Air-Blast Z pad Cleaning
• Low Profile design

Product Information:

MaxxMacro 70 Pneumatic Low Profile Chuck 30210 Rust Proof is fully 100% cross-compatible with System 3R 3R-602.10-1 Pneumatic WEDM chucks. Designed for precision, it offers an accuracy of ±0.002 mm and features a low-profile design ideal for tight spaces. The chuck includes air-blast cleaning to maintain clean reference surfaces and supports fixed indexing at 4x90° for consistent positioning. Also compatible with System 3R models 3R-602.10-1 and 3R-602.10-1K.

MaxxMacro 116 Stainless Unhardened Pallet with 75 Pallet Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Unhardened pallet with reference element.

MaxxDesign Exclusive Features:

• Machined from solid 440C stainless steel for maximum strength and corrosion resistance
• Fully assembled with MaxxMacro Ø75 mm Performance Pallet

Product Information:

MaxxMacro 116 Stainless Unhardened Pallet with 75 Pallet Performance is made from 440C stainless steel and comes unhardened, ready for custom machining. This two-piece design includes a mounted Ø75 mm MaxxMacro Performance reference element, pre-assembled and ready to run. The pallet is rust-resistant and ideal for customization. Please note: these are not cast pallets—they are machined for precision and long-term reliability.

MaxxMagnum Stainless Check Ruler Master 6861 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Check ruler for setting flatness and angular positions. Ground hole for centring.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMagnum Master 6861 Check Ruler is 100% cross compatible with System 3R 3R-686.1-HD Magnum Master control ruler. For setting angular positions and parallel. Designed for pickup of macro magnum chucks All our master and gauges include a Quality Certificate of calibration

MaxxMacro 70 Stainless Performance Rust Proof Pallet Index Disabled comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Performance pallet with 250" finished dowels and index-disable function.

MaxxDesign Exclusive Features:

• Machined from solid 440C stainless steel for maximum strength and corrosion resistance
• Includes Index Disabled feature and four finished .250" dowel holes

Product Information:

MaxxMacro 70 Stainless Performance Rust Proof Pallet Index Disabled features a disabled index system designed to prevent incorrect loading. The pallet integrates a male interface that pairs with the female interface on the chuck, following the same 40 mm centerline and .250 dowel pattern as OEM System 3R pallets. It provides fool-proof positioning for use with Disable Index chucks. Ideal for applications where absolute alignment control is critical.

MaxxMacro 116 Stainless Integrated Pallet Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Hardened pallet with reference element and mounting pattern.

MaxxDesign Exclusive Features:

• Machined from solid 440C stainless steel for maximum strength and corrosion resistance
• Integrated MaxxMacro Ø75 mm Performance Pallet

Product Information:

MaxxMacro 116 Stainless Integrated Pallet Performance features a one-piece hardened stainless steel design with an integrated Ø75mm MaxxMacro pallet. This high-performance solution is machined—not cast—for maximum rigidity, durability, and corrosion resistance. The pallet comes ready to run with your custom mounting pattern installed, and includes basic holes and dowels in the list price. Ideal for demanding applications where precision and long-term reliability are key.

MaxxMacro 54 Multi 2 QuickChuck Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-chuck system on a common mounting plate for compact setups.
• Supports multiple operations to increase productivity.

MaxxMacro 54 Spring Loaded Centering Sensor Probe 5mm Tip comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For automatic measurement of workpieces in CNC EDM sinking centers.

MaxxDesign Exclusive Features:

• Includes rust-proof MaxxMacro 54 Performance Pallet.
• Four threaded pins to ensure correct concentricity.

Product Information:

MaxxMacro 54 Spring Loaded Centering Sensor Probe with overrun protection of 1 mm on X, Y, and Z axes. Repetition accuracy: 0.002 mm on X, Y, and Z axes.

MaxxMacro 54 Stainless Slotted Electrode Holder .500" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for flat electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Cast Plated Pallet
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Stainless Slotted Electrode Holder is fully compatible with System 3R Macro OEM holders. It comes fully assembled and ready to run, with four set screws to secure the electrode. It is mounted on our precision-cast plated stainless MaxxMacro 54 Pallet—ready to run right out of the box. Ideal for holding saw-cut or milled blanks with reliability and repeatability.

MaxxMacro 54 Probe Spring Loaded Centering Sensor 6mm Tip comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

• MaxxMacro 54 Probe Spring Loaded Centering Sensor 6mm Tip
• 6MM ball is standard
• Repetition accuracy: Macro compatible Standard – within 0.002 mm

Product Details:

MaxxMagnum Self Centering MaxxVise 4.725" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

• MaxxVise's MaxxMagnum HP Self Centering Vise 4.725 Inch Size Work Piece is designed for high accuracy precision CNC equipment horizontal and vertical.
• Stainless Steel Construction 4.725" Maximum work piece
• Bidirectional self centering repeatability .005MM
• Mounted and Centered on MaxxMagnum 156 Pallet Ready to Run
• The center of jaws are aligned and centered to the MaxxMacro pallet when the vise is closed.
• Steps on the jaws: depth 3mm, width 2.75mm.
• Max torque: 20Nm

Product Details:

MaxxMacro 54 ER Collet Chuck ER40 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To clamp cylindrical parts with ER Collet System.

MaxxDesign Exclusive Features:

• Includes our MaxxMacro 54 440C performance pallet
• Compatible with standard ER collet sizes

Product Information:

The MaxxMacro 54 ER Collet Chuck ER40 is a high-performance collet chuck that is 100% cross-compatible with System 3R 3R-659.16P Macro systems. Designed for precision and durability, it offers ±0.015 mm concentricity and ±0.002 mm repeatability, making it ideal for both manual and automated setups. Each unit includes a MaxxMacro 54 440C stainless performance pallet, ensuring stability and rust resistance in demanding machining environments. For robotic integration, the chuck can be customized with gripper interfaces, stop buttons, and more. It also features flushing through for debris removal and extended tool life.

MaxxMacro Junior Drawbar 40511 Stainless comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Drawbar compatible with any MaxxMacro pallet. Check the required type for the chuck you are using.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro Drawbar Macro Junior 40511 Stainless is 100% cross compatible with System 3R 3R-405.11E MacroJunior. Cross compatible with System 3R Macro Jr Tooling Systems 3R-405.11 3R-405.11E 3R-405.11EE

MaxxMacro 54 Stainless Round Stock Holder .625" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for round electrodes.

MaxxDesign Exclusive Features:

• Fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Round Stock Stainless Electrode Holder features a pocket with a tight tolerance of -0 / +0.001" and a depth of 0.625". The workpiece is securely held by a stainless steel set screw. Fully compatible with System 3R Macro tooling, this precision-machined holder delivers repeatability within 0.002 mm. It comes fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet, ready for immediate use.

MaxxMacro 54 Stainless Round Stock Holder .500" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for round electrodes.

MaxxDesign Exclusive Features:

• Fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Round Stock Stainless Electrode Holder features a pocket with a tight tolerance of -0 / +0.001" and a depth of 0.625". The workpiece is securely held by a stainless steel set screw. Fully compatible with System 3R Macro tooling, this precision-machined holder delivers repeatability within 0.002 mm. It comes fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet, ready for immediate use.

MaxxMacro Automatic Drawbar 60510W Low Profile Stainless comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Drawbar compatible with any MaxxMacro pallet. Check the required type for the chuck you are using.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 60510W Low Profile Drawbar is 100% cross compatible System 3R Drawbar 3R-605.10 WEDM Drawbar Macro. MaxxMacro 60510W Lowprofile Drawbar includes the plastic clip, flushing o-ring and are machined ABCD all locations for precision seating of pallet. 100% cross compatible with System 3R Macro Tooling Systems 3R-605.10

MaxxMacro 54 Stainless Round Stock Holder .250" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for round electrodes.

MaxxDesign Exclusive Features:

• Fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Round Stock Stainless Electrode Holder features a pocket with a tight tolerance of -0 / +0.001" and a depth of 0.625". The workpiece is securely held by a stainless steel set screw. Fully compatible with System 3R Macro tooling, this precision-machined holder delivers repeatability within 0.002 mm. It comes fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet, ready for immediate use.

MaxxMacro 54 Stainless Round Stock Holder .375" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for round electrodes.

MaxxDesign Exclusive Features:

• Fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Round Stock Stainless Electrode Holder features a pocket with a tight tolerance of -0 / +0.001" and a depth of 0.625". The workpiece is securely held by a stainless steel set screw. Fully compatible with System 3R Macro tooling, this precision-machined holder delivers repeatability within 0.002 mm. It comes fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet, ready for immediate use.

MaxxMacro Automatic Drawbar 60514 Stainless Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Drawbar compatible with any MaxxMacro pallet. Check the required type for the chuck you are using.

MaxxDesign Exclusive Features:

• Precision-machined at all ABCD points for accurate pallet seating
• Includes flushing O-ring and plastic clip for easy setup and maintenance

Product Information:

The MaxxMacro Drawbar Automatic 60514 Stainless Performance is engineered for precision, repeatability, and automation-ready performance. It is 100% cross compatible with System 3R Macro Combi tooling systems, including 3R-605.14 and 3R-605.14E. Designed for seamless integration into automated environments, it features a junior interface for gripper and magazine handling. Each drawbar is machined at all ABCD locations for exact seating and reliable toolchanging. It also comes with a plastic clip and flushing O-ring to ensure smooth operation in high-performance machining and EDM applications. This model functions identically to the MaxxMacro Drawbar Automatic 60514 Stainless Performance.

MaxxMacro 54 Spring Loaded Centering Sensor Probe 3mm Tip comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For automatic measurement of workpieces in CNC EDM sinking centers.

MaxxDesign Exclusive Features:

• Includes rust-proof MaxxMacro 54 Performance Pallet.
• Four threaded pins to ensure correct concentricity.

Product Information:

MaxxMacro 54 Spring Loaded Centering Sensor Probe with overrun protection of 1 mm on X, Y, and Z axes. Repetition accuracy: 0.002 mm on X, Y, and Z axes.

MaxxMagnum 156 Stainless Unhardened Pallet Performance Rust Proof comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Blank unhardened MaxxMagnum pallet only, without reference element, pre-drilled.

MaxxDesign Exclusive Features:

• Unhardened MaxxMagnum pallet
• Pre-drilled and ready to mount directly to your existing MaxxMagnum reference element

Product Information:

MaxxMagnum 156 Unhardened Pallet Stainless Performance Rust Proof is pre-drilled and ready to mount directly to your existing MaxxMagnum reference element. Made from rust-resistant, unhardened stainless steel, this machinable pallet offers both durability and flexibility for custom applications. Its corrosion-resistant properties make it ideal for demanding shop environments while maintaining full compatibility with the MaxxMagnum system.

MaxxMacro 70 Stainless Performance Rust Proof Pallet MXRefix comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Hardened with MXrefix holes, flushing connection and clearance holes for six fixing screws.

MaxxDesign Exclusive Features:

• Machined from solid 440C stainless steel for maximum strength and corrosion resistance
• Includes MXrefix and dowels holes

MaxxMacro 54 Multi 4 QuickChuck Chuck Precision Rail comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Precision rail with multiple chucks for easier installation and a more space-saving setup.

MaxxDesign Exclusive Features:

• Multi-chuck system on a common mounting plate for compact setups.
• Supports multiple operations to increase productivity.

MaxxMacro 70 Stainless 30mm Spacer Pallet Casted comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For graphite electrodes or copper electrodes/workpieces with a rough mounting surface.

MaxxDesign Exclusive Features:

• Clearance holes for four fixing screws
• Includes a MaxxMacro 70 Cast Pallet

Product Information:

MaxxMacro 70 Stainless 30mm Spacer Pallet is a cast pallet specifically designed for graphite or copper electrodes and workpieces with rough or uneven mounting surfaces. Its hardened construction ensures durability and consistent performance. Includes a MaxxMacro 70 Cast Pallet.

MaxxMacro 54 Brass Slotted Electrode Holder U30 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for flat electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Cast Plated Pallet
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Brass Slotted Electrode Holder is fully compatible with System 3R Macro OEM holders. It comes fully assembled and ready to run, with four set screws to secure the electrode. It is mounted on our precision-cast plated stainless MaxxMacro 54 Pallet—ready to run right out of the box. Ideal for holding saw-cut or milled blanks with reliability and repeatability.

MaxxMacro 54 Manual QuickChuck Angle Adapter 90 Degree comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For easy transition from vertical to horizontal.

MaxxDesign Exclusive Features:

• Includes a bar actuated MaxxMacro 54 QuickChuck
• Positional accuracy to data. 004mm

Product Information:

MaxxMacro 54 Manual QuickChuck with 90° Adapter for horizontal mounting of Macro holders. Allows user to quickly go from vertical to horizontal position while maintaining location and accuracy.

MaxxMacro 54 Manual Angle Adapter 90 Degree Adapter 6" with 70 Performance Pallet comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For horizontal mounting of MaxxMacro holders.

MaxxDesign Exclusive Features:

• Allows user to quickly go from vertical to horizontal position while maintaining location and accuracy.
• Positional accuracy to data. 005mm

Product Information:

MaxxMacro 54 Manual Chuck 90 Degree Adapter 6" with 70 Performance Pallet is a over sized reversed model to the Maxx Tooling Standard 90 Degree Holder. This holder has also been reversed to our standard allowing you to increase the distance from your head to the burn location. Allows user to quickly go from vertical to horizontal position while maintaining location and accuracy.

MaxxMacro 54 Aluminum Manual Chuck Horizontal Extension 12" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Horizontal extension with manual chuck.

MaxxDesign Exclusive Features:

• High quality materials: Chuck and Pallet are 440C 57-60HRC rust proof design.
• Extension: Aluminum 12" Center to Center

Product Information:

Note due to the limitations of aluminum it is recommended the user master the extension and adjust provided data once the MaxxMacro Horizontal Chuck Extension is installed on your equipment.

MaxxMacro 54 Brass Slotted Electrode Holder U20 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for flat electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Cast Plated Pallet
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Brass Slotted Electrode Holder is fully compatible with System 3R Macro OEM holders. It comes fully assembled and ready to run, with four set screws to secure the electrode. It is mounted on our precision-cast plated stainless MaxxMacro 54 Pallet—ready to run right out of the box. Ideal for holding saw-cut or milled blanks with reliability and repeatability.

MaxxMacro 54 Brass Slotted Electrode Holder U25 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for flat electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Cast Plated Pallet
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Brass Slotted Electrode Holder is fully compatible with System 3R Macro OEM holders. It comes fully assembled and ready to run, with four set screws to secure the electrode. It is mounted on our precision-cast plated stainless MaxxMacro 54 Pallet—ready to run right out of the box. Ideal for holding saw-cut or milled blanks with reliability and repeatability.

MaxxMacro 54 Stainless Slotted Electrode Holder U20 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for flat electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Cast Plated Pallet
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Stainless Slotted Electrode Holder is fully compatible with System 3R Macro OEM holders. It comes fully assembled and ready to run, with four set screws to secure the electrode. It is mounted on our precision-cast plated stainless MaxxMacro 54 Pallet—ready to run right out of the box. Ideal for holding saw-cut or milled blanks with reliability and repeatability.

MaxxMacro 54 Brass Slotted Electrode Holder U15 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for flat electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Cast Plated Pallet
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Brass Slotted Electrode Holder is fully compatible with System 3R Macro OEM holders. It comes fully assembled and ready to run, with four set screws to secure the electrode. It is mounted on our precision-cast plated stainless MaxxMacro 54 Pallet—ready to run right out of the box. Ideal for holding saw-cut or milled blanks with reliability and repeatability.

MaxxMacro 54 Stainless Slotted Electrode Holder U15 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for flat electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Cast Plated Pallet
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Stainless Slotted Electrode Holder is fully compatible with System 3R Macro OEM holders. It comes fully assembled and ready to run, with four set screws to secure the electrode. It is mounted on our precision-cast plated stainless MaxxMacro 54 Pallet—ready to run right out of the box. Ideal for holding saw-cut or milled blanks with reliability and repeatability.

MaxxMacro 54 Stainless Slotted Electrode Holder U25 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for flat electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Cast Plated Pallet
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Stainless Slotted Electrode Holder is fully compatible with System 3R Macro OEM holders. It comes fully assembled and ready to run, with four set screws to secure the electrode. It is mounted on our precision-cast plated stainless MaxxMacro 54 Pallet—ready to run right out of the box. Ideal for holding saw-cut or milled blanks with reliability and repeatability.

MaxxMacro 54 Stainless Slotted Electrode Holder U30 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for flat electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Cast Plated Pallet
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Stainless Slotted Electrode Holder is fully compatible with System 3R Macro OEM holders. It comes fully assembled and ready to run, with four set screws to secure the electrode. It is mounted on our precision-cast plated stainless MaxxMacro 54 Pallet—ready to run right out of the box. Ideal for holding saw-cut or milled blanks with reliability and repeatability.

MaxxMacro 54 Stainless Pocket Electrode Holder S30 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for square or round electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Cast Plated Pallet
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Stainless Pocket Electrode Holder is fully compatible with System 3R square pocket holders and works seamlessly across all System 3R Macro Systems. Engineered for precision with a repeatability of 0.002 mm, this holder comes fully assembled and ready for immediate use. It includes stainless set screws and is mounted on our plated MaxxMacro 54 Stainless Cast Plated Pallet for exceptional durability and stability.

MaxxMacro 54 Stainless Pocket Electrode Holder S35 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for square or round electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Cast Plated Pallet
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Stainless Pocket Electrode Holder is fully compatible with System 3R square pocket holders and works seamlessly across all System 3R Macro Systems. Engineered for precision with a repeatability of 0.002 mm, this holder comes fully assembled and ready for immediate use. It includes stainless set screws and is mounted on our plated MaxxMacro 54 Stainless Cast Plated Pallet for exceptional durability and stability.

MaxxMacro 54 Brass Pocket Electrode Holder S30 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for square or round electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Cast Plated Pallet
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Brass Pocket Electrode Holder is fully compatible with System 3R Macro OEM holders. It comes fully assembled and ready to run, with two set screws to secure the electrode. It is mounted on our precision-cast plated stainless MaxxMacro 54 Pallet—ready to run right out of the box. Ideal for holding saw-cut or milled blanks with reliability and repeatability.

MaxxMacro 54 Stainless Pocket Electrode Holder S20 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for square or round electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Cast Plated Pallet
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Stainless Pocket Electrode Holder is fully compatible with System 3R square pocket holders and works seamlessly across all System 3R Macro Systems. Engineered for precision with a repeatability of 0.002 mm, this holder comes fully assembled and ready for immediate use. It includes stainless set screws and is mounted on our plated MaxxMacro 54 Stainless Cast Plated Pallet for exceptional durability and stability.

MaxxMacro 54 Brass Pocket Electrode Holder S25 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for square or round electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Cast Plated Pallet
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Brass Pocket Electrode Holder is fully compatible with System 3R Macro OEM holders. It comes fully assembled and ready to run, with two set screws to secure the electrode. It is mounted on our precision-cast plated stainless MaxxMacro 54 Pallet—ready to run right out of the box. Ideal for holding saw-cut or milled blanks with reliability and repeatability.

MaxxMacro 54 Brass Pocket Electrode Holder S15 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for square or round electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Cast Plated Pallet
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Brass Pocket Electrode Holder is fully compatible with System 3R Macro OEM holders. It comes fully assembled and ready to run, with two set screws to secure the electrode. It is mounted on our precision-cast plated stainless MaxxMacro 54 Pallet—ready to run right out of the box. Ideal for holding saw-cut or milled blanks with reliability and repeatability.

MaxxMacro 54 Brass Pocket Electrode Holder S20 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for square or round electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Cast Plated Pallet
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Brass Pocket Electrode Holder is fully compatible with System 3R Macro OEM holders. It comes fully assembled and ready to run, with two set screws to secure the electrode. It is mounted on our precision-cast plated stainless MaxxMacro 54 Pallet—ready to run right out of the box. Ideal for holding saw-cut or milled blanks with reliability and repeatability.

MaxxMacro 70 Self Centering MaxxVise 2.75" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxVise Self Centering Vise 2.75 Inch . MaxxMacro 70 is designed for high accuracy precision CNC equipment horizontal and vertical.

• Stainless Steel Construction 2.75" Maximum work piece
• Reversable jaws
  
• Bidirectional self centering repeatability .005MM
• Mounted and Centered on MaxxMacro 70 High Performance Premium Pallet
• The center of jaws are aligned and centered to the MaxxMacro pallet when the vise is closed.
• 100% cross compatible with System 3r Macro Systems.
• Max torque: 8Nm

If you are robotically loading we can adapt this vise to various grippers, stop buttons etc.

Product Details:

MaxxMacro 54 to Maxx-ER 50 System Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. QuickChuck adapter for an easy transition from MaxxMacro to Maxx-ER.

MaxxDesign Exclusive Features:

• 100% cross-compatible with System 3R and Erowa ITS systems
• Repeatability .003MM

Product Information:

MaxxMacro 54 to Maxx-ER 50 System Chuck Adapter allows users to go from MaxxMacro 54 (System 3R Macro System) to Maxx-ER 50 (Erowa ITS 50 System).

MaxxMacro 70 Low Profile Manual Chuck Angle Adapter Rust Proof comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Vertical extension with manual chuck and adjustable angle.

MaxxDesign Exclusive Features:

• Full stainless mechanisms for rust prevention in full WEDM Submersion
• Angles can be set continuously from 0 to 90°

Product Information:

MaxxMacro 70 Low Profile Manual Chuck Variable Angle Adapter Rust Proof is great for burning large driver pockets. Complete with MaxxMacro 70 Performance Pallet and a MaxxMacro 70 Manual Chuck (Rust Proof). The heavy-duty construction and rust-proof features make it a reliable tool, making it ideal for industrial use and perfect for burning large driver pockets. For use on all MaxxMacro 70MM and 54MM Macro pallets 100% cross compatible with System 3R Macro systems To set the angle with precision, you can use an angle gauge or a sine plate for accurate measurements. These tools will help you achieve the desired angle effectively.

MaxxMacro 54 Stainless 30mm Spacer Pallet Casted comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For graphite electrodes or copper electrodes/workpieces with a rough mounting surface.

MaxxDesign Exclusive Features:

• Clearance holes for four fixing screws
• Includes a MaxxMacro 54 Casted and Plated Pallet

Product Information:

MaxxMacro 54 Stainless 30mm Spacer Pallet is a cast pallet specifically designed for graphite or copper electrodes and workpieces with rough or uneven mounting surfaces. Its hardened construction ensures durability and consistent performance. Includes a MaxxMacro 54 Cast Pallet.

MaxxMacro 54 Centering Sensor Stationary Probe 6mm Tip comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Measuring probe with measuring head for machines with measurement cycle function.

MaxxDesign Exclusive Features:

• Includes rust-proof MaxxMacro 54 Performance Pallet.
• Twin set screws per side allow for quick and precise tip alignment.

Product Information:

The MaxxMacro 54 Centering Sensor Stationary Probe features a fixed probe with a measuring head, it is ideal for machines equipped with measurement cycle functions. Twin set screws on each side allow for easy and precise alignment of the probe tip, ensuring accurate centering. The unit comes mounted on a MaxxMacro 54 Performance Rust-Proof Pallet, offering maximum stability, quality, and durability in demanding shop environments.

MaxxMacro 70 Self Centering MaxxVise 4.725" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxVise Self Centering Vise 4.725 Inch .MaxxMacro 70 is designed for high accuracy precision CNC equipment horizontal and vertical.

• Stainless Steel Construction 4.725" Maximum work piece
• Reversable jaws
• Bidirectional self centering repeatability .005MM
• Mounted and Centered on MaxxMacro 70 High Performance Premium Pallet
• The center of jaws are aligned and centered to the MaxxMacro pallet when the vise is closed.
• 100% cross compatible with System 3r Macro Systems
• Steps on the jaws: depth 3mm, width 2.75mm.
• Max torque: 20Nm

If you are robotically loading we can adapt this vise to various grippers, stop buttons etc.

Product Details:

MaxxMacro 54 Centering Sensor Stationary Probe 4mm Tip comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Measuring probe with measuring head for machines with measurement cycle function.

MaxxDesign Exclusive Features:

• Includes rust-proof MaxxMacro 54 Performance Pallet.
• Twin set screws per side allow for quick and precise tip alignment.

Product Information:

The MaxxMacro 54 Centering Sensor Stationary Probe features a fixed probe with a measuring head, it is ideal for machines equipped with measurement cycle functions. Twin set screws on each side allow for easy and precise alignment of the probe tip, ensuring accurate centering. The unit comes mounted on a MaxxMacro 54 Performance Rust-Proof Pallet, offering maximum stability, quality, and durability in demanding shop environments.

MaxxMacro 54 Centering Sensor Stationary Probe 5mm Tip comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Measuring probe with measuring head for machines with measurement cycle function.

MaxxDesign Exclusive Features:

• Includes rust-proof MaxxMacro 54 Performance Pallet.
• Twin set screws per side allow for quick and precise tip alignment.

Product Information:

The MaxxMacro 54 Centering Sensor Stationary Probe features a fixed probe with a measuring head, it is ideal for machines equipped with measurement cycle functions. Twin set screws on each side allow for easy and precise alignment of the probe tip, ensuring accurate centering. The unit comes mounted on a MaxxMacro 54 Performance Rust-Proof Pallet, offering maximum stability, quality, and durability in demanding shop environments.

MaxxMacro 54 Stainless Slotted Electrode Holder U35 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for flat electrodes, designed for use with saw cut or milled blanks.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Cast Plated Pallet
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Stainless Slotted Electrode Holder is fully compatible with System 3R Macro OEM holders. It comes fully assembled and ready to run, with four set screws to secure the electrode. It is mounted on our precision-cast plated stainless MaxxMacro 54 Pallet—ready to run right out of the box. Ideal for holding saw-cut or milled blanks with reliability and repeatability.

MaxxMacro 54 Centering Sensor Stationary Probe 8mm Tip comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Measuring probe with measuring head for machines with measurement cycle function.

MaxxDesign Exclusive Features:

• Includes rust-proof MaxxMacro 54 Performance Pallet.
• Twin set screws per side allow for quick and precise tip alignment.

Product Information:

The MaxxMacro 54 Centering Sensor Stationary Probe features a fixed probe with a measuring head, it is ideal for machines equipped with measurement cycle functions. Twin set screws on each side allow for easy and precise alignment of the probe tip, ensuring accurate centering. The unit comes mounted on a MaxxMacro 54 Performance Rust-Proof Pallet, offering maximum stability, quality, and durability in demanding shop environments.

MaxxMacro 54 360° Rotatable Pendulum Vise Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For precision clamping of prismatic parts, continuously rotatable 360°.

MaxxDesign Exclusive Features:

• Continuously able to rotate around 360°.
• Includes a 3-jaw set: To cover the full 0 to 100mm range with precision and rigidity

Product Information:

MaxxMacro 54 360° Rotatable Pendulum Vise Performance is for adjustable workpiece positioning in three axes. Continuously able to rotate around 360°. Set with three pairs of clamping jaws. Maxx Tooling EDM Vise is constructed of 420C Stainless for max hardness and rust resistance, and 100% compatible with System 3R Macro Systems.

MaxxMacro Combi Drawbar 40516 Stainless comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Drawbar compatible with any MaxxMacro pallet. Check the required type for the chuck you are using.

MaxxDesign Exclusive Features:

• Precision machined for toolchanger compatibility and repeatable pallet seating
• Rust-resistant stainless construction with integrated flushing capability

Product Information:

The MaxxMacro Drawbar Macro Combi 40516 is a high-performance stainless steel drawbar engineered for precision, durability, and full automation compatibility. It is 100% cross compatible with System 3R tooling systems, including 3R-405.16E, 3R-405.16, and 3R-405.16EE. Each drawbar is machined at all ABCD locations to ensure secure seating and accurate alignment in high-speed CNC and EDM environments. It includes a plastic clip and flushing O-rings for optimal flushing performance and long-term reliability.

MaxxMacro 54 ER Collet Chuck ER16 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To clamp cylindrical parts with ER Collet System.

MaxxDesign Exclusive Features:

• Includes our MaxxMacro 54 440C performance pallet
• Compatible with standard ER collet sizes

Product Information:

The MaxxMacro 54 ER Collet Chuck ER16 is a high-performance collet chuck that is 100% cross-compatible with System 3R 3R-659.16P Macro systems. Designed for precision and durability, it offers ±0.015 mm concentricity and ±0.002 mm repeatability, making it ideal for both manual and automated setups. Each unit includes a MaxxMacro 54 440C stainless performance pallet, ensuring stability and rust resistance in demanding machining environments. For robotic integration, the chuck can be customized with gripper interfaces, stop buttons, and more. It also features flushing through for debris removal and extended tool life.

MaxxMacro 54 Stainless 30mm Spacer Pallet comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Hardened, with clearance holes for four fixing screws.

MaxxDesign Exclusive Features:

• Clearance holes for four fixing screws
• Includes proper chip pocket for automated robotic loading

Product Information:

MaxxMacro 54 Stainless 30mm Spacer Pallet is a hardened cast pallet designed for precision and durability. It features clearance holes for four fixing screws and parallel-ground top and bottom faces to ensure accurate, stable mounting. With a repetition accuracy within 0.0015 mm and a rust-resistant finish, this pallet is ideal for demanding machining environments where repeatability and reliability are critical.

MaxxMacro 70 Pneumatic Chuck 6001030 with Adjustable Base comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck for permanent mounting on the machine spindle or onto the machine table or as a lathe chuck.

MaxxDesign Exclusive Features:

• Adjustable Base for Precise Alignment.
• Includes insulator for EDM use.

Product Information:

MaxxMacro 70 Pneumatic Chuck 6001030 with Adjustable Base is ideal for attachment to EDM machines and machine spindles. Its adjustable mounting plate is engineered to provide maximum flexibility during installation, allowing both rotational and perpendicular alignment adjustments. For EDM applications, the system includes an insulator plate to prevent electrical conductivity. This component can be omitted when used on CNC or non-EDM machines, making the setup adaptable to a range of machining environments.

MaxxMacro 70 Stainless Cast Plated Pallet comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Hardened and precision-cast, with clearance holes for four fixing screws. Nickel-plated side faces

MaxxDesign Exclusive Features:

• Casted and plated stainless pallet.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 70 Stainless Cast Plated Pallet can be mounted directly to the bottom of electrode holders or other fixtures to provide high-accuracy centering and full integration with the MaxxMacro system. It includes clearance holes for four fixing screws and four unfinished dowel holes.

MaxxMacro 54 Manual Chuck with Adjustable Base comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For mounting on the machine spindle or onto a 5-axis machine table. Adjustments are rotational and perpendicular.

MaxxDesign Exclusive Features:

• Adjustable Base for Precise Alignment
• Includes insulator for EDM use

Product Information:

The MaxxMacro 54 Manual Chuck with Adjustable Base is an ideal solution for permanent mounting on machine spindles or 5-axis machine tables, especially in precision applications. Its adjustable mounting plate is engineered to provide maximum flexibility during installation, allowing both rotational and perpendicular alignment adjustments—crucial for achieving optimal positioning on EDM spindles or 5-axis CNC tables. For EDM applications, the system includes an insulator plate to prevent electrical conductivity. This component can be omitted when used on CNC or non-EDM machines, making the setup adaptable to a range of machining environments.

MaxxMacro 70 Pneumatic Chuck 6001430 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

System 3R Compatible MAXX Brand Pneumatic Chuck Macro compatible

MX-6031 is a Pneumatic chuck for mounting directly on the machine spindle. In application it can also be used in fixed fixture where as pneumatic function is required

Similar to 3R-600.14-30 but is not low profile and uses the long drawbar

Maxx Tooling System 3R compatible chucks come standard with Air Clean function

Product Details:

MaxxMacro 54 Stainless Control Ruler Master 6061 Rust Proof comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For setting angular positions and for centring MaxxMacro chucks.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Accuracy: 0.002 mm (0.00008") for precise centering and angular setup.

Product Information:

The MaxxMacro 54 Stainless Control Ruler 6061 Rust Proof is a high-precision alignment tool, 100% compatible with System 3R 3R-606.1 Macro Tooling. Designed for setting angular positions and centering Macro chucks, it features a ground hole for accurate centering and a 100 mm measuring length. With an accuracy of 0.002 mm (0.00008"), it ensures consistent and reliable setup in demanding machining environments. As with all MaxxMacro masters and gauges, it includes a Quality Certificate of calibration for traceability and confidence in performance.

MaxxMacro 54 Manual Chuck 60024 Rust Proof WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Rust resistant manual chuck designed for permanent mounting.

MaxxDesign Exclusive Features:

• Full Stainless 440C Construction with Rust-Proof Components
• Ground back face for mounting on the machine spindle.

MaxxMacro 54 Manual Angle Adapter 90 Degree Adapter comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For horizontal mounting of MaxxMacro holders.

MaxxDesign Exclusive Features:

• Includes a MaxxMacro Manual Chuck
• Positional accuracy to data. 004mm

Product Information:

MaxxMacro 54 Manual Chuck 90 Degree Adapter allows user to quickly go from vertical to horizontal position while maintaining location and accuracy. Rounded corners allowing closer access to burn locations without the worry of corners tagging.

MaxxMacro 54 Stainless Control Rod Master Checking Pin comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Check mandrel with ground C-reference for setting MaxxMacro chucks.

MaxxDesign Exclusive Features:

• Includes MaxxMacro 54 Performance Pallet
  
• Repetition accuracy 0.002mm

Product Information:

The MaxxMacro 54 Stainless Control Rod Master Checking Pin is a high-precision reference tool designed for compatibility with System 3R 3R-606 Control Rod Macro systems. Engineered with a ground C-reference, it ensures accurate mandrel checking and precise setup of Macro chucks. Each unit includes a MaxxMacro 54 Performance Pallet and comes with a Quality Certificate of calibration for full traceability and assurance.

MaxxMacro 54 Stainless Round Stock Holder 1.0" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for round electrodes.

MaxxDesign Exclusive Features:

• Fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Round Stock Stainless Electrode Holder features a pocket with a tight tolerance of -0 / +0.001" and a depth of 0.625". The workpiece is securely held by a stainless steel set screw. Fully compatible with System 3R Macro tooling, this precision-machined holder delivers repeatability within 0.002 mm. It comes fully assembled on a plated MaxxMacro 54 Stainless Cast Pallet, ready for immediate use.

MaxxMacro 54 Stainless Round Stock Holder .500" Performance comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for round electrodes.

MaxxDesign Exclusive Features:

• Fully assembled on a MaxxMacro 54 Stainless Performance Pallet.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Round Stock Stainless Electrode Holder features a pocket with a tight tolerance of -0 / +0.001" and a depth of 0.625". The workpiece is securely held by a stainless steel set screw. Fully compatible with System 3R Macro tooling, this precision-machined holder delivers repeatability within 0.002 mm. It comes fully assembled on a plated MaxxMacro 54 Stainless Performance Pallet, ready for immediate use.

MaxxMacro 54 Stainless Cast Plated Pallet comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Hardened and precision-cast, with clearance holes for four fixing screws. Nickel-plated side faces

MaxxDesign Exclusive Features:

• Casted and plated stainless pallet.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro 54 Stainless Cast-Plated Pallet can be mounted directly to the bottom of electrode holders or other fixtures to provide high-accuracy centering and full integration with the MaxxMacro system. It includes clearance holes for four fixing screws and four unfinished dowel holes.

MaxxMacro 54 Stainless Blank Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. To mount electrodes and workpieces of various shapes.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Includes Chip Carrier (Chip Sensor) and threaded holes for Cleat.

Product Information:

The MaxxMacro 54 Blank Electrode Holder comes completely assembled with our MaxxMacro 54 Plated Pallet and is ready to machine your own custom pattern into. We provide both top and bottom (Pallet) precision ground. MaxxMacro 54 Stainless Pocket Electrode Holders are assembled with Stainless screws and our MaxxMacro 54 Stainless Cast Pallet Plated

MaxxMacro 54 Stainless Manual QuickChuck Chuck Rust Proof WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. QuickChuck with a compact 2" footprint, rust-proof, and highly versatile.

MaxxDesign Exclusive Features:

• Compact 56 mm (2") square design.
• Optimized for submerged WEDM environments

Product Information:

MaxxMacro 54 Manual QuickChuck Rust Proof WEDM is specially engineered to overcome the size limitations of standard MaxxMacro chucks. Featuring a compact 56 mm (2") square footprint, this chuck opens up new possibilities for using MaxxMacro tooling in space-constrained environments—without compromising precision or performance. Designed for Wire EDM (WEDM) applications, it includes fully stainless-steel internal mechanisms to ensure rust resistance and long-term reliability, even during full submersion operations.

MaxxMacro 54 Stainless 17,5mm Spacer Pallet comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For graphite electrodes or copper electrodes/workpieces with a rough mounting surface. To be mounted on MaxxMacro pallet.

MaxxDesign Exclusive Features:

• Ground Top and Bottom
• Includes proper chip pocket for automated robotic loading

Product Information:

MaxxMacro 54 Stainless 17,5mm Spacer Pallet is predrilled for mounting on MaxxMacro 54 pallets.

MaxxMacro 54 Aluminum Manual Chuck Vertical Extension 100mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Vertical extension with manual chuck.

MaxxDesign Exclusive Features:

• Precision ground to ensure uniform height. This guarantees that when using multiple extensions, they all have the same height.
• Height accuracy is 0.008 mm (0.0003"), and XY accuracy is 0.002 mm.

MaxxMacro 54 Aluminum Manual Chuck Vertical Extension 6" comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Vertical extension with manual chuck.

MaxxDesign Exclusive Features:

• Precision ground to ensure uniform height. This guarantees that when using multiple extensions, they all have the same height.
• Height accuracy is 0.008 mm (0.0003"), and XY accuracy is 0.002 mm.

MaxxMacro 54 Centering Sensor Stationary Probe 3mm Tip comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Measuring probe with measuring head for machines with measurement cycle function.

MaxxDesign Exclusive Features:

• Includes rust-proof MaxxMacro 54 Performance Pallet.
• Twin set screws per side allow for quick and precise tip alignment.

Product Information:

The MaxxMacro 54 Centering Sensor Stationary Probe features a fixed probe with a measuring head, it is ideal for machines equipped with measurement cycle functions. Twin set screws on each side allow for easy and precise alignment of the probe tip, ensuring accurate centering. The unit comes mounted on a MaxxMacro 54 Performance Rust-Proof Pallet, offering maximum stability, quality, and durability in demanding shop environments.

MaxxMacro 54 User Kit Manual Chuck 62841S MaxxMacro starter kit with Manual Chuck and all essentials for setting up your milling center.

MaxxDesign Exclusive Features:

• 100% Cross Compatible with OEM System.
• Includes all essential components to get started with the system.

Product Information:

MaxxMacro 54 Manual Chuck User Kit 62841S is fully compatible with System 3R system. Similar to 3R-628.41-S. This innovative workholding system is designed to improve efficiency and lower production costs, offering a reliable and cost-effective alternative to current machining solutions. MaxxMacro 54 Manual Chuck User Kit 62841S includes:

• (x1) MaxxMacro 54 Manual Chuck with Mounting Plate CNC Manual (MM-MCMPS001 / MX-0CNCM);
• (x1) MaxxMacro 54 Stainless Control Ruler High Performance (MM-MA54S001 / MX-CH656);
• (x6) MaxxMacro Pallet 54 Stainless Cast Plated (MM-PA54S013 / MX-0013M-1);
• (x4) MaxxMacro 54 Aluminum Slotted Electrode Holder U25 (MM-US54A025 / MX-3RU25BUD);
• (x4) MaxxMacro 54 Aluminum Pocket Electrode Holder S25 (MM-SP54A025 / MX-3RSAL-25);
• (x2) MaxxMacro 54 17,5mm Spacer (MM-SC54S000 / MX-3R658SP);
• (x3) MaxxMacro Drawbar 6052 Short Manual Stainless (MM-DRWBR101 / MX-STDR3R-1);
• (x3) MaxxMacro Drawbar Long Automatic 605 Stainless (MM-DRWBR201 / MX-605DB-10) or MaxxMacro Drawbar Macro Combi 40516 Stainless (MM-DRWBR110 / MX-40516).

MaxxMacro 54 User Kit QuickChuck 62831S MaxxMacro starter kit with QuickChuck and all necessary products to set up your milling center.

MaxxDesign Exclusive Features:

• 100% Cross Compatible with OEM System.
• Includes all essential components to get started with the system.

Product Information:

MaxxMacro User Kit 62831S is fully compatible with System 3R system. Similar to 3R-628.31-S. This innovative workholding system is designed to improve efficiency and lower production costs, offering a reliable and cost-effective alternative to current machining solutions MaxxMacro User Kit 62831S includes:

• (x1) MaxxMacro 54 Manual Quick Chuck Rust Proof WEDM (MM-QC54R000 / MX-3RM56W);
• (x6) MaxxMacro Pallet 54 Performance Rust Proof with .250 Dowels (MM-PA54W250 / MX-0013M-1D25) or with 6mm Dowels (MM-PA54W006 / MX-0013M-1D6);
• (x1) MaxxMacro 54 Stainless Control Ruler High Performance (MM-MA54S001 / MX-CH656);
• (x3) MaxxMacro 54 Aluminum Slotted Electrode Holder U25 (MM-US54A025 / MX-3RU25BUD);
• (x3) MaxxMacro 54 Aluminum Pocket Electrode Holder S25 (MM-SP54A025 / MX-3RSAL-25);
• (x3) MaxxMacro Drawbar 6052 Short Manual Stainless (MM-DRWBR101 / MX-STDR3R-1);
• (x3) MaxxMacro Drawbar Long Automatic 605 Stainless (MM-DRWBR201 / MX-605DB-10) or Drawbar Macro Combi 40516 Stainless (MM-DRWBR110 / MX-40516).

MaxxMacro 54 Stainless Performance Rust Proof Pallet with 6mm Dowels comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Machined from solid Stainless 440c block, performance pallet with 6mm finished dowels.

MaxxDesign Exclusive Features:

• Machined from solid 440C stainless steel for maximum strength and corrosion resistance
• Includes four finished 6mm dowel holes

Product Information:

MaxxMacro 54 Stainless Performance Rust-Proof Pallet with 6mm Dowels is not a cast pallet—it’s precision-machined from a solid block of 440C stainless steel, offering the highest performance, quality, and rigidity available. Its corrosion-resistant construction makes it ideal for even the most demanding machining environments, with no risk of flaking or peeling as seen in plated alternatives. This ensures long-lasting performance and reliability. As part of the extensive MaxxMacro product range, this pallet performs exceptionally well even as a standalone fixture. It allows for easy workpiece mounting with screws and provides an outstanding direct repeatability of 0.002 mm, fully compatible with the System 3R Macro interface.

MaxxMacro Long Automatic Drawbar 605 Stainless comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Drawbar compatible with any MaxxMacro pallet. Check the required type for the chuck you are using.

MaxxDesign Exclusive Features:

• Precision-machined at all ABCD points for accurate pallet seating
• Includes flushing O-ring and plastic clip for easy setup and maintenance

Product Information:

The MaxxMacro Drawbar Long Automatic 605 Stainless is a high-performance upgrade that is 100% cross compatible with System 3R Macro drawbars, including 3R-605.1E, 3R-605.1, 3R-605.1EE, 3R-605.1RS, and 3R-605.4. Designed for use with automatic toolchangers, it features enhanced stability, precision, and durability, making it ideal for demanding CNC and EDM operations. Each drawbar comes equipped with a plastic clip, flushing O-rings, and is machined at all ABCD positions to ensure proper engagement with toolchanger fingers and repeatable pallet seating.