System 3R compatible MaxxMacro® WEDM Wire EDM Tooling

MaxxMagnum 29266HP WEDM Ruler comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Adapter to connect leveling head to any MXRuler accessory.

MaxxDesign Exclusive Features:

• High quality materials: Full 440C rust proof design.
• Mounts on an Mounting Head and can be supplemented with MXRuler accessories.

Product Information:

MaxxMagnum 29266HP WEDM Ruler is the ideal adapter to connect a MaxxMacro Leveling Head setup with the MXRuler system. If you are already using a MaxxMacro Leveling Head—compatible with various MaxxMacro Leveling Head WEDM accessories—this Magnum adapter allows you to expand your setup by seamlessly integrating any MXRuler accessories. Maximize the versatility of your existing configuration and unlock a wider range of tooling options with this smart and powerful solution. The MaxxMagnum 29266HP WEDM Ruler includes the following items: MaxxMagnum 29266HP WEDM Ruler; MaxxMacro Ruler Eccentric Endstop (MM-RUACR214); MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203); MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201); MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205).

MaxxMacro 70 Twin Manual Angle Adapter 90 Degree Adapter Rust Proof WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For horizontal mounting of MaxxMacro holders. Rust resistant.

MaxxDesign Exclusive Features:

• Includes two MaxxMacro Manual Chucks, full rust-proof construction for Wire EDM environments.
• Positional accuracy to data. 004mm

Product Information:

MaxxMacro 70 Twin Manual Angle Adapter 90 Degree Adapter allows user to quickly go from vertical to horizontal position while maintaining location and accuracy. Rounded corners allowing closer access to burn locations without the worry of corners tagging.

MaxxMacro 70 WEDM Horizontal Pneumatic Chuck RSM 600143 comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Horizontal pneumatic chuck for permanent mounting on the machine table.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

MaxxMacro 239445 Double Side MXRuler Ruler 445mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Double-sided rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability. With these rulers, accessories can be clamped on both sides of the ruler.

MaxxDesign Exclusive Features:

• Double-sided design for flexible setups, with enhanced rigidity thanks to upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro Double MXRuler
• 2 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 4 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 4 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 4 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Mitsubishi MP1200
• Mitsubishi MV1200R
• Mitsubishi MD Pro 3
• Mitsubishi NA12
• Mitsubishi NA1200
• Mitsubishi NA1200P
• Mitsubishi MV1200S
• Charmilles RoboFil 330
  
• Excetek V400G
  
• Fanuc alpha C400iB
• Fanuc alpha C400iC
  
• Sodick AL400G
• Sodick AL400P
• Sodick ALC400G
• Sodick ALN400G
• Sodick ALN400Q
• Sodick VL400Q
• Sodick AG400L
• Sodick AQ400L
• Sodick SL400G
• Sodick SL400Q
• Sodick SLC400G

Vertical setup:

• Fanuc alpha 1iD
• Fanuc alpha 1iDP
• Fanuc alpha 1iE
• Fanuc alpha C600iA
• Fanuc alpha C600iB
• Fanuc alpha C600iC
• Mitsubishi BA24
• Mitsubishi NA24
• Mitsubishi NA2400
• Mitsubishi NA2400P
• Mitsubishi MP2400
• Mitsubishi MV2400R / R Z+
• Mitsubishi MV2400S Z+
  
• Makino DUO64
• Makino SP64 (yr 2005-)

MaxxMacro 239645 Double side MXRuler Ruler 645mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Double-sided rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability. With these rulers, accessories can be clamped on both sides of the ruler.

MaxxDesign Exclusive Features:

• Double-sided design for flexible setups, with enhanced rigidity thanks to upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro Double MXRuler
• 2 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 6 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 4 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 6 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc alpha C600iA
  
• Fanuc alpha C600iB
  
• Fanuc alpha C600iC
  
• Fanuc alpha 1iD
  
• Fanuc alpha 1iDP
  
• Fanuc alpha 1iE
  
• Mitsubishi MP2400
  
• Mitsubishi MV2400R / R Z+
  
• Mitsubishi MV2400S
  
• Mitsubishi MV2400S Z+
  
• Mitsubishi BA24
  
• Mitsubishi NA24
  
• Mitsubishi NA2400
  
• Mitsubishi NA2400P
  
• Mitsubishi PX05
  
• Sodick AL600G
  
• Sodick ALC600G
  
• Sodick ALN600G
  
• Sodick ALN600Q
  
• Sodick VL600Q
  
• Sodick AG600L
  
• Sodick AQ600L
• Sodick AQ600
  
• Sodick SL600G
  
• Sodick SL600P
  
• Sodick SL600Q
  
• Sodick SLC600G
  
• YCM Impuls 6

Vertical setup:

• Fanuc alpha C800iB
  
• Mitsubishi MV4800R
  
• Mitsubishi MV4800S

MaxxMacro 23926 Stepped 60mm Support Tab MXRuler Accessory WEDM (Set of 2) comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Support tab adjusted by -5 mm. For MXruler.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro MXRuler 23926 WEDM Stepped 60mm Support Tab (Set of 2) for positioning workpieces 5 mm above machine zero line. This tab enables precise, accurate, and reliable positioning of workpieces, drastically reducing the time required for quality assurance in production processes. The MaxxMacro MX-23926 MXRuler WEDM Zero-line support tab is fully compatible with System 3R ruler system. Recommended maximum workpiece weight per tap 50 kg.

MaxxMacro 70 Twin Pneumatic Low Profile Chuck 30210 Rust Proof comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck for MaxxMacro or MaxxMacroTwin. Horizontal mounting on the machine table.

MaxxDesign Exclusive Features:

• Twin Pneumatic Chuck with High Clamping Force
• Air-blast cleaning for Z-reference surfaces

Product Information:

Experience effortless, precise machining with the MaxxMacro 70 Twin Pneumatic Low Profile Chuck 30210 Rust Proof. Fully 100% cross-compatible with System 3R models 3R-602.10-1, 3R-602.12-1, and 3R-602.12-1K, this chuck features horizontal mounting to reduce setup time and costs. Its quick-change design enables fast, safe, and high-precision operations, ideal for demanding applications. The chuck includes air-blast cleaning for Z-reference surfaces to ensure accurate positioning and offers a powerful clamping force of 2 × 6700 N for secure workholding.

MaxxMacro 54 Manual Chuck with Flange 60023 Rust Proof comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Cast chuck with mounting flange for mounting on the machine spindle or in a fixture.

MaxxDesign Exclusive Features:

• Includes flange
• Rust-resistant stainless steel body.

Product Information:

MaxxMacro 54 Manual Chuck with Flange 60023 Rust Proof is a rust-resistant, cast stainless steel chuck built for permanent mounting on a machine spindle. Its precision-ground back face ensures accurate installation, while the integrated mounting flange supports standard Macro holders. Designed for manual operation, it features four fixed index positions (4×90°).

MaxxMacro 2015A Angle shelf MXRuler Accessory WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Mounts directly on the machine table. For vertical mounting of a MaxxMacro chuck in the machine.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 2015A WEDM Angle shelf mounts directly on the machine table. For vertical mounting of a Macro chuck in the machine. Its design ensures maximum stability for precise and reliable accuracy. Enjoying the ease of installation without the need for further attachments. MaxxMacro 2015A WEDM Angle shelf is fully compatible with System 3R macro system. *Chuck not included

MaxxMacro 54 Stainless Mounting Plate for Manual QuickChuck comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 54 Chuck Mounting Plate is specifically designed to mount a MaxxMacro 54 quick chuck onto the machine table. It offers a precise fit for lasting durability and stability, ensuring the chuck is held securely in place with minimal vibration. For MaxxMacro Chuck 54 Quick Chuck. *Chuck not included

MaxxMacro 70 Pneumatic Chuck 600863 Machine-Adapted WEDM comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Pneumatic chuck for permanent mounting in the machine spindle.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

The MaxxMacro Chuck 600863 Pneumatic Machine-Adapted Chuck is 100% cross-compatible with the System 3R 3R-600.86-30 Pneumatic Chuck. It is rust-proof, corrosion-resistant, and features fixed index positions at 4x90º.

MaxxMacro 29292 SuperVise WEDM Vise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For collision-free clamping of workpieces with 30-degree dovetail connection.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 29292 WEDM SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts. MaxxMacro 29292 WEDM SuperVise intended specially for clamping tool blanks with 30-degree dovetail connection. Removable middle jaw allows clamping of either one large or two smalls blanks. Recommended maximum weight 7 kg. Tightening torque 7 Nm.

MaxxMacro 2933 SuperVise WEDM Vise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Vice for clamping round workpieces Ø8-90 mm.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 2933 WEDM SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts. MaxxMacro 2933 WEDM SuperVise for clamping round workpieces 8-90 mm. Recommended maximum workpiece weight 7 kg. Tightening torque 8 Nm.

MaxxMacro 2923P Prism SuperVise WEDM Vise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For vertical or horizontal collision-free clamping of round workpieces (Ø3-15 mm).

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 2923P WEDM Prism SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts. MaxxMacro 2923P WEDM Prism SuperVise for vertical or horizontal collision-free clamping of round workpieces (Ø 3-15 mm). Alternatively, rotate the movable jaw and use as a regular MX-2923 (3R-292.3) vise for rectangular workpieces (0-100 mm). Tightening torque 7 Nm.

MaxxMacro 2923 SuperVise WEDM Accessory comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For clamping rectangular workpieces up to 100 mm.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 2923 WEDM SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts. MaxxMacro 2923 WEDM SuperVise for clamping rectangular workpieces up to 100 mm. Mounts on HP, Magnum or MacroTwin leveling adapter. Tightening torque 7 Nm.

MaxxMacro 2923D Double SuperVise WEDM Vise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For collision-free clamping of both rectangular and round workpieces (14-45 mm and Ø3-15 mm respectively).

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 2923D WEDM Double SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts. MaxxMacro 2923D WEDM Double SuperVise for collision-free clamping of both rectangular and round workpieces (14-45 mm and Ø 3-15 mm respectively). Total clamping range, 60 mm (to be split between two workpieces). Alternatively, dismount the double jaw and use as a regular MX-2923 (3R-292.3) vise for rectangular workpieces (0-100 mm). Tightening torque 7 Nm.

MaxxMacro 2923S Universal WEDM Holder comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Holder for round workpieces up to 90 mm, or rectangular workpieces 100x90 mm.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 2923S WEDM Universal Holder is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts. MaxxMacro 2923S WEDM Universal Holder for round workpieces up to 90 mm, or rectangular workpieces 100x90 mm. Tightening torque 4 Nm. Recommended maximum workpiece weight 7 kg

MaxxMacro 2922 SuperVise WEDM Vise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For clamping rectangular workpieces up to 100 mm.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 2922 WEDM SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts. MaxxMacro 2922 WEDM SuperVise for clamping rectangular workpieces up to 100 mm. Tightening torque 3 Nm.

MaxxMacro 2921 SuperVise WEDM Vise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. For clamping rectangular workpieces up to 77 mm.

MaxxDesign Exclusive Features:

• 100% cross-compatible with OEM system
• Mounts on Mounting Head, HP, Magnum or MacroTwin leveling adapter.

Product Information:

MaxxMacro 2921 WEDM SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts. MaxxMacro 2921 WEDM SuperVise for clamping rectangular workpieces up to 77 mm. Mounts on HP, Magnum or MacroTwin leveling adapter. Tightening torque 3 Nm.

MaxxMagnum 2936HP SuperVise WEDM Vise comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Vice for clamping round workpieces Ø15-155 mm.

MaxxDesign Exclusive Features:

• High quality materials.
• 100% cross-compatible with OEM system

Product Information:

MaxxMacro 2936HP WEDM Magnum SuperVise is 100% cross compatible with System 3R. This makes it easy to perform compound machining operations quickly and accurately. Plus, it enables seamless integration of machining operations with other systems and parts. MaxxMacro 2936HP WEDM Magnum SuperVise for clamping round workpieces 15-155 mm. Mounts on HP, Magnum or MacroTwin levelling adapter. Recommended maximum workpiece weight 12 kg