System 3R compatible MaxxMacro® WEDM Wire EDM Tooling

MaxxMacro 20029J1 MXRuler WEDM Reference Element 295mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc alpha 0iD
  
• Fanuc alpha 0iDP
  
• Fanuc alpha 0iE
  
• Fanuc alpha 0iP
  
• Fanuc alpha C400iA
  
• Fanuc Alpha 0B
  
• Fanuc Alpha 0C
  
• Sodick AD325L
  
• Sodick AL400G
  
• Sodick AL400P
  
• Sodick ALC400G
  
• Sodick ALN400G
  
• Sodick ALN400Q
  
• Sodick AP450L (W. 2002-)
  
• Sodick VL400Q
  
• Sodick AG400L
  
• Sodick SL400G
  
• Sodick SL400Q
  
• Sodick SLC400G
  
• Sodick AQ400L
  
• YCM Impuls 4
• YCM Impuls 5

Vertical setup:

• Makino SP64 (yr 2005-)
  
• Sodick AP250L (W. 2002-)
  
• Sodick AP450L (W. 2002-)
  
• Sodick AQ360L
  

MaxxMacro 2002J2 MXRuler WEDM Reference Element 209mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc alpha 0iB
  

Vertical setup:

• Fanuc alpha 1iA
  
• Fanuc alpha 1iB
  
• Fanuc alpha 1iC
  

MaxxMacro 2003J1 MXRuler WEDM Reference Element 345mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 20P
  
• AgieCharmilles CUT 200 (yr 2012-)
  
• AgieCharmilles CUT 200 Bp
  
• AgieCharmilles CUT 200 C / P
  
• AgieCharmilles CUT 200 mS / Sp
  
• AgieCharmilles CUT C 350
  
• AgieCharmilles CUT E 350
  
• AgieCharmilles CUT P 350
  
• Charmilles 230/240 FI
  
• Charmilles RoboFil 230
  
• Charmilles RoboFil 240
  
• Charmilles RoboFil 240cc
  
• Charmilles RoboFil 690
  
• Charmilles RoboFil 690cc
  
• Fanuc Alpha 1A
  
• Fanuc alpha C400iB
  
• Fanuc alpha C400iC
  
• Sodick AQ900L
  
• Sodick AQ750L
  
• Sodick AQ327L
  
• Sodick AQ360L
  
• ONA AF60
  
• ONA AV60
  
• ONA AE600
  
• ONA AX6
  

Vertical setup:

• AgieCharmilles CUT 20P
  
• AgieCharmilles CUT 200 (yr 2012-)
  
• AgieCharmilles CUT 200 Bp
  
• AgieCharmilles CUT 200 C / P
  
• AgieCharmilles CUT 200 mS / Sp
  
• AgieCharmilles CUT 400 (yr 2012)
  
• AgieCharmilles CUT 400 Sp
  
• AgieCharmilles CUT C 350
  
• AgieCharmilles CUT E 350
  
• AgieCharmilles CUT P 350
  
• AgieCharmilles CUT P 800
  
• AgieCharmilles CUT P 800 L Flushing
  
• Charmilles RoboFil 230
  
• Charmilles RoboFil 240
  
• Charmilles RoboFil 240cc
  
• Makino U3 H.E.A.T. (Square)
  
• Makino U3 (U-shape)
  
• Makino U3i (Square)
  
• Makino U6 H.E.A.T. (Square)
  
• Makino U6 (U-shape)
  
• Makino U6i (Square)
  
• Makino U32j
  
• Makino UP32j
  
• Makino UPV-3
  
• Makino W32FB
  
• Makino DUO64
  
• Makino SP64 (yr -2005)
  
• Makino U32
  
• Makino U32i
  
• Makino WB32B
  
• Sodick AL600G
  
• Sodick ALC600G
  
• Sodick ALN600G
  
• Sodick ALN600Q
  
• Sodick AQ750L
  
• Sodick VL600Q
  
• Sodick AG600L
  
• Sodick AQ537L
  
• Sodick AQ560L
  
• Sodick AQ600L
  
• Sodick SL600G
  
• Sodick SL600P
  
• Sodick SL600Q
  
• Sodick SLC600G
  
• ONA AE600
  

MaxxMacro 20047J2 MXRuler WEDM Reference Element 470mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT C 600
  
• AgieCharmilles CUT E 600
  
• Excetek V500G
  
• Mitsubishi FA20-S Advance
• Mitsubishi FA40-S Advance
• Mitsubishi MV1200R
• Mitsubishi MP2400
  
• Mitsubishi MV2400R / R Z+
  
• Mitsubishi MV2400S
  
• Mitsubishi MV2400S Z+
  
• Mitsubishi FA20
  
• Mitsubishi FA20SM (old ver.)
  
• Mitsubishi FX20 (old ver.)
  
• Mitsubishi PA20
  
• Mitsubishi QA20
  
• Mitsubishi SX2
  
• Mitsubishi SX20
  
• Sodick AQ600L
  
• ONA AE400
  
• ONA AX4
  

Vertical setup:

• Fanuc alpha C400iA
  
• Fanuc alpha C400iB
  
• Fanuc alpha C400iC
  
• Mitsubishi FA10-S Advance
  
• Mitsubishi FA40-S Advance
  
• Mitsubishi MP1200
  
• Mitsubishi MV1200R
  
• Mitsubishi BA8
  
• Mitsubishi FA10 (Square)
  
• Mitsubishi FA10 SM (Square)
  
• Mitsubishi FX10 (Square)
  
• Mitsubishi FX10 K (Square)
  
• Mitsubishi MD Pro 2
  
• Mitsubishi MD Pro 3
  
• Mitsubishi NA12
  
• Mitsubishi NA1200
  
• Mitsubishi NA1200P
  
• Mitsubishi SX1
  
• Mitsubishi SX10
  
• Sodick VZ300L
  

MaxxMacro 2004J2 MXRuler WEDM Reference Element 470mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question.

MaxxDesign Exclusive Features:

• Designed for mounting the MXRuler, MaxxMacro Mounting Heads, and other compatible accessories for flexible Wire EDM setups.
• High-quality materials with a fully rust-proof design for long-lasting performance

Product Information:

The MaxxMacro MXRuler Reference Element is available in various lengths to match different Wire EDM machines, with custom sizes available upon request. Each unit includes 1 MaxxMacro MXRuler Reference Element and 1 Adjustable End-Stop to support repeatable setups. Designed with a precision dovetail profile, this component serves as a mounting base not only for the MXRuler but also for a wide range of compatible MaxxMacro Wire EDM accessories. It is also compatible with MaxxMacro Leveling Heads, unlocking extensive configuration possibilities with both MXRuler accessories and Mounting Head components.

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Charmilles RoboFil 6040
  
• Charmilles RoboFil 6050
  
• Fanuc alpha C600iA
  
• Fanuc alpha C600iB
  
• Fanuc alpha C600iC
  
• Fanuc alpha 1iA
  
• Fanuc alpha 1iB
  
• Fanuc alpha 1iC
• Fanuc Alpha 1C
  
• Fanuc alpha 1iD
  
• Fanuc alpha 1iDP
  
• Fanuc alpha 1iE
  
• Mitsubishi FA40-S Advance
  
• Sodick AQ1200L
  
• ONA AF35
  
• Accutex 500I
  
• YCM Impuls 6

Vertical setup:

• Mitsubishi FA40-S Advance
• Sodick AQ1200L

MaxxMacro 239275 MXRuler Ruler 275mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 1000 (yr 2000-)
  

MaxxMacro 239365 MXRuler Ruler 365mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Fanuc alpha 0iA
• Fanuc alpha 0iB
• Fanuc alpha 0iC
• Fanuc Alpha 0C
  
• Fanuc alpha 0iP
  
• Mitsubishi BA8
• Mitsubishi MD Pro 2
• Mitsubishi PA05
  
• Sodick AD325L
  

Vertical setup:

• ONA AE300
• ONA AX3
  
• Makino SP43
  

MaxxMacro 239395 MXRuler Ruler 395mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Mitsubishi FA10-S Advance
• Mitsubishi FA10
• Mitsubishi FA10 SM
• Mitsubishi FX10
• Mitsubishi FX10 K
• Mitsubishi SX1
• Mitsubishi SX10
  
• Sodick AQ325L
  
• Seibu M35B
• Seibu MM35B
• Accutex 300I

Vertical setup:

• Mitsubishi FA20-S Advance
• Mitsubishi FA20
• Mitsubishi FA20SM
• Mitsubishi X20
• Mitsubishi PA20
• Mitsubishi QA20
• Mitsubishi SX2
• Mitsubishi SX20
  
• Seibu MM50B
• Seibu 1JMM50B
  

MaxxMacro 239445 MXRuler Ruler 445mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Fully rust-proof design with built-in height adjustment
• Compatible with any reference element (requires MaxxMacro A2391 WEDM 60mm Sliding Clamps when used)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 2 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 2 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Mitsubishi MP1200
• Mitsubishi MV1200R
• Mitsubishi MD Pro 3
• Mitsubishi NA12
• Mitsubishi NA1200
• Mitsubishi NA1200P
• Mitsubishi MV1200S
• Charmilles RoboFil 330
  
• Excetek V400G
  
• Fanuc alpha C400iB
• Fanuc alpha C400iC
  
• Sodick AL400G
• Sodick AL400P
• Sodick ALC400G
• Sodick ALN400G
• Sodick ALN400Q
• Sodick VL400Q
• Sodick AG400L
• Sodick AQ400L
• Sodick SL400G
• Sodick SL400Q
• Sodick SLC400G
• YCM Impuls 4

Vertical setup:

• Fanuc alpha 1iD
• Fanuc alpha 1iDP
• Fanuc alpha 1iE
• Fanuc alpha C600iA
• Fanuc alpha C600iB
• Fanuc alpha C600iC
• Mitsubishi BA24
• Mitsubishi NA24
• Mitsubishi NA2400
• Mitsubishi NA2400P
• Mitsubishi MP2400
• Mitsubishi MV2400R / R Z+
• Mitsubishi MV2400S Z+
  
• Makino DUO64
• Makino SP64 (yr 2005-)
  

MaxxMacro 239575 MXRuler Ruler 575mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• AgieCharmilles CUT 3000 / S / X (yr 2011-)
• AgieCharmilles CUT X 500
  
• Agie Challenge 3
  
• Agie Classic 3
  
• Agie Evolution 3
  
• Agie Excellence 3
  
• Agie Progress 3
  
• AgieCharmilles Progress VP3 (yr2014-2021)
  
• Agiecut Size 3
  

MaxxMacro 239605 MXRuler Ruler 605mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Sodick AQ560L
  
• Accutex 500I
  

MaxxMacro 239645 MXRuler Ruler 645mm comes fully assembled and ready to use. This product is 100% cross-compatible with the System 3R Macro OEM system. The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

MaxxDesign Exclusive Features:

• Enhanced rigidity with upgraded dimensions: 86 mm wide (up from 60 mm) and 36 mm high (up from 30 mm)
• Compatible with any reference element (requires MaxxMacro A2392 MXRuler WEDM Sliding 86mm Clamps)

Product Information:

The MaxxMacro MXRuler is the most versatile setup for your Wire EDM machine. It is available in various lengths (-XXX) to match different machine sizes, with each length paired with a specifically designed cross-section to ensure optimal stability and performance. The MXRuler is compatible with a wide range of accessories, allowing for quick and easy mounting of workpieces of various sizes and shapes.

The MaxxMacro MXRuler includes the following items:

• 1 MaxxMacro MXRuler
• 1 MaxxMacro Ruler Eccentric Endstop (MM-RUACR214)
• 2 pieces of MaxxMacro MXRuler A239 WEDM Clamps non-rail (MM-RUACA103)
• 3 pieces of MaxxMacro MXRuler 23922 WEDM Stepped Support Tab (MM-RUACR203)
• 2 pieces of MaxxMacro MXRuler 23925 WEDM Standard 60mm Support Tab (MM-RUACR201)
• 3 pieces of MaxxMacro MXRuler 239241 WEDM Basic Toe Clamps (MM-RUACR205)

Machine Compatibility

Fits the following machines and more. Some machine applications may not be referenced below. Please contact us if you have any doubts.

Horizontal setup:

• Accutex AU 600
• Fanuc alpha C600iA
  
• Fanuc alpha C600iB
  
• Fanuc alpha C600iC
  
• Fanuc alpha 1iD
  
• Fanuc alpha 1iDP
  
• Fanuc alpha 1iE
  
• Mitsubishi MP2400
  
• Mitsubishi MV2400R / R Z+
  
• Mitsubishi MV2400S
  
• Mitsubishi MV2400S Z+
  
• Mitsubishi BA24
  
• Mitsubishi NA24
  
• Mitsubishi NA2400
  
• Mitsubishi NA2400P
  
• Mitsubishi PX05
  
• Sodick AL600G
  
• Sodick ALC600G
  
• Sodick ALN600G
  
• Sodick ALN600Q
  
• Sodick VL600Q
  
• Sodick AG600L
  
• Sodick AQ600L
• Sodick AQ600
  
• Sodick SL600G
  
• Sodick SL600P
  
• Sodick SL600Q
  
• Sodick SLC600G
  
• ONA AD35
  

Vertical setup:

• Fanuc alpha C800iB
  
• Mitsubishi MV4800R
  
• Mitsubishi MV4800S